What are the testing items and testing standards for product Reliability Testing ?

【Reliability Testing】

Part of ACCREDITED TESTING SCOPE for Guangzhou LCS Compliance Testing Laboratory Ltd.

•  Test Object: Electric and electronic products

Item/ Parameter------Standard or Method:

Degress of protection provided by enclosures (IP code)-----IEC 60529 / EN 60529 / AS 60529

Glow-wire test---------IEC 60595-2-11 / EN 60595-2-11 / AS/NZS 60595-2-11

Needle-flame test------IEC 60695-11-5 / EN 60695-11-5 / AS/NZS 60695-11-5

Ball pressure test---------IEC 60695-10-2 / EN 60695-10-2

Low temperature----------IEC 60068-2-1 / BS EN 60068-2-1

High temperature---------IEC 60068-2-2 / BS EN 60068-2-2

Damp heat, steady state--------IEC 60068-2-78 / BS EN 60068-2-78

Damp heat-------IEC 60068-2-30 / BS EN 60068-2-30

Composite temperature/humidity cyclie test----------IEC 60068-2-38 / BS EN 60068-2-38

Change of temperature-----------IEC 60068-2-14 / DIN EN 60068-2-14

Salt spray test-----------IEC 60068-2-11 / BS EN 60068-2-11 OR IEC 60068-2-52 / BS EN 60068-2-52

Shock----------IEC 60068-2-27 / BS EN 60068-2-27

Vibration-------IEC 60068-2-6 / NF EN 60068-2-6 OR IEC 60068-2-64 / NF EN 60068-2-64

Free fall------IEC 60068-2-31 / DIN EN 60068-2-31

• Test Object: Motor vehicle electrical appliances and accessories

Item/ Parameter------Standard or Method:

Vibration------ISO 16750-3:2012 4.1

Mechanical shock-------ISO 16750-3:2012 4.2

Free fall-------ISO 16750-3:2012 4.3

Constant temperature test-------ISO 16750-4:2010 5.1

Temperature gradient change--------ISO 16750-4:2010 5.2

Temperature cycle--------ISO 16750-4:2010 5.3

Salt spray test-------ISO 16750-4:2010 5.5

Humid beat,cyclic-----ISO 16750-4:2010 5.6

Damp heat,steady state--------ISO 16750-4:2010 5.7

• Test Object: Vehicle Electronic and Electrical Products/Automotive Electronic Parts

Item/ Parameter------Standard or Method:

Radiated Emissions-ALSE method------CISPR 25:2016 / EN 55025:2017 6.5 OR ECE R10-05 / ECE R10-06

Conducted Emissions（Voltage Method）------CISPR 25:2016 / EN 55025:2017 6.3

Conducted Emissions (Current Method)------CISPR 25:2016 / EN 55025:2017 6.4

Conducted Transient Emissions------ISO 7637-2:2011 4.3 OR EN 50498:2010 7.3 OR ECE R10-05

Electrostatic discharge-------ISO 10605:2008 / SAE J1113/13:2015 5

Conducted Transient Immunity-Power supply Line-----ISO 7637-2:2011 4.4 OR EN 50498:20110 7.4 OR ECE R10-05 / ECE R10-06 Annex 10

Conducted Transient Immunity-Signal Line-------ISO 7637-3:2016 3/4

Bulk current Injection RF Immunity-------ISO 11452-4:2020 6.1 OR ECE R10-05 / ECE R10-06 Annex 9 OR SAE J1113-4:2014 6

Radiated Immunity-ALSE method--------ISO11452-2:2019 8/9 OR ECE R10-05 / ECE R10-06 Annex 9

Portable transmitters-----ISO11452-9:2012

Magnetic field Immunity------ISO11452-8:2015

Direct current supply voltage--------ISO 16750-2:2012 4.2

Over voltage---------ISO 16750-2:2012 4.3

Slow decrease and increase of supply voltage-------ISO 16750-2:2012 4.5

Discontinuities in supply voltage------ISO 16750-2:2012 4.6

Reversed voltage------ISO 16750-2:2012 4.7

Superimposed alternating voltage------ISO 16750-2:2012 4.4

Ground reference and supply offset-------ISO 16750-2:2012 4.8

Open circuit protection--------ISO 16750-2:2012 4.9

Short circuit protection-----ISO 16750-2:2012 4.10

Withstand voltage---------ISO 16750-2:2012 4.11

Insulation resistance---------ISO 16750-2:2012 4.12 

【Please feel free to tell me if you have any questions about product test and certifications.】

Email 【[email protected]】

Mobile/WhatsApp/WeChat 【0086-15013279042】