Are You Troubled by Porosity and Shrinkage on Aluminum Alloy High Pressure Die Casting Parts?
?? Porosity: Porosity is one of the most common defects in high-pressure die casting. It occurs when air or gas gets trapped in the molten metal during the casting process. This defect can lead to reduced strength and increased susceptibility to cracking and corrosion.
?? Shrinkage: Shrinkage occurs when the metal cools and solidifies, and there is not enough material to fill the cavity completely. This defect can lead to incomplete parts, and in severe cases, it can result in the casting breaking during cooling.
These are the two most troublesome defects of high pressure die casting, are you also troubled by them?
If yes, CEX Casting?could solve your problem.
Based on the strong demand for high-quality components in the domestic and foreign markets, excellent conditions for the development of advanced?#liquidforging?technology have been formed, and there’re a broad market for the production of lightweight components using advanced?#squeezecasting?technology.
Six years ago, our company’s Dr.Han found this chance, and focus on squeeze die casting, we also could regard it as a superior?#diecasting?process. After three years continuous research and testing, the machine was finally successfully developed, as well as have been in mass production for three years.
The squeeze casting products with no air holes or shrinkage, pls see its mechanical behavior and internal cut section??
220-240 Mpa High Yield Strength
260-300MpaTensile Strength
80-90 Hb hardness
4.5%-6% Elongation
领英推荐
Do you find above mechanical data is also similar with?#forging??
Actually, in addition to being a 2.0 version of?#diecast, it's also an affordable alternative to?#forge?.
The following is a product used in electric bicycle brakes. It has been using forging before, and now we have opened 3 sets of molds with our new technology, it is in continuous mass production, and the buyer is very satisfied with them, especially save nealy 50% machining cost for them.
Our new process is especially suitable for the #automotiveindustry , medical, aerospace, and #valve products that require airtightness.
Want to have high mechanical behavior? Want to save cost? You could message me, professional suggestion will be provided.
CEX Casting:www.cexcasting.com
Ellen Wang
Email: [email protected]