Are you looking for a test solution for lithium batteries with ultra-low DC internal resistance?

Internal resistance is a key parameter that determines the power capability, energy efficiency and heat generation of lithium-ion batteries. It is also an important indicator of the state of health (SoH) of the batteries, which affects the acceleration, fast charging and cooling system design of electric vehicles (EVs). In addition, in order to avoid battery abuse and improve battery safety and service life, the Battery Management System (BMS) needs to establish an internal resistance model to accurately manage the power capability. Therefore, research on internal resistance and power capability plays an important role in developing next-generation battery cells and optimizing battery systems. However, as it has become a trend for manufacturers to adopt ultra-low DC internal resistance and enlarge single cell designs as a means to improve the power density of electric vehicles, general equipment is increasingly unable to deliver the required test current of thousands of amperes, which usually leaves test engineers with a limited choice of expensive equipment.

Nowadays, battery internal resistance measurement technology is mainly divided into two types: 1) DC resistance is primarily determined by using pulse (step) current to measure the potential difference, which is then used to calculate the internal resistance value; 2) AC resistance is determined with electrochemical impedance spectroscopy (EIS) using disturbance spectrum technology. Due to the complex electrochemical properties of the battery, the DC resistance cannot be directly compared with the AC impedance. The two measurement techniques are complementary due to the difference in the analyses' time domains, and are mostly selected according to the application conditions.

In terms of EV and energy storage system design, pulse current is often used to test DC internal resistance. In addition to the short test time, research has shown that current amplitude also affects the internal resistance of the battery [1], and that the high-current pulse test more closely approximates real load applications. The internationally standard methods for pulse current test are the VDA current step method [2] and the Hybrid Pulse Power Characterization (HPPC) test [3] [4], with pulse widths between 100mS-30S.

The voltage drops are impacted by various phenomena related to internal resistance, depending on their respective measurement timescales: ohmic resistance of the transient voltage drop, equivalent capacitance and interface electric charge transfer resistance during the first few seconds of the voltage drop, and polarization resistance of slower response due to ion diffusion (Figure 1). The total resistance is calculated from the results of the pulse test. It should be noted that a greater pulse width may change the state of charge (SOC) and cause additional voltage drops leading to deviations in the internal resistance measurement. Conversely, a pulse amplitude that is too small will lead to a significant increase in measurement uncertainty. Measurement error may also be caused by current/voltage measurement errors and temperature control errors.

During USABC HPPC tests, the internal resistance and power characteristics of the battery are calculated by subjecting battery cells to 10~30S of maximum pulse discharge and 10S of maximum pulse charge under different SOCs with the aim of measuring the change in electric potential. By this principle, if a 60Ah lithium battery cell needed to have its pulse working current (10C-rate) tested 10 times, it used be necessary to purchase 600A charging and discharging equipment. But not anymore, because now Chroma provides a 200% pulse current test solution!

The single channel current capacity of Chroma 17010H is 300A, which can be amplified with Super Mode to output 200% current (600A) within 30 seconds, especially suitable for pulse current performance testing. The new design focuses on battery applications and optimizes the power output mode, leading to a 50% reduced footprint and a 30% reduction in price (Figure 1).

Key to the high pulse current capability designed by Chroma is the power circuit's temperature control. First, the 17010H's high-conversion-efficiency energy recovery architecture greatly reduces the heating of components during charging and discharging. Second, it increases the operating current by optimizing power module integration and component selection. Finally, heat flow design is applied to to achieve temperature control. As for measurement, a distributed high-precision current transformer structure that ensures current accuracy is supplemented with a cold and hot area circuit layout to reduce temperature drift, together forming an integrated battery test system that achieves 200% pulse current output.

The key advantages of Chroma 17010H:

1. High measurement reproducibility helps testers to save considerable time on trend judgment and characteristic analysis.
2. Zero-crossover and fast current response capabilities provide test results that closely correspond with real applications.
3. Multiple current range design improves the accuracy of small currents, with a minimum current range of 1:10 and suitable ranges for both high and low rate performance tests.
4. Discharge energy recycling efficiency of 75% not only saves on operating power and decreases the waste heat from air conditioning, but also reduces laboratory power distribution requirements.
5. Independent Level 2 V. Protection function strengthens the safety of high current testing.

For related product information, please visit our official website and leave your request and contact information. We will be happy to be of service!

Chroma 17010H Battery Reliability Test System

References:

• Noshin Omar, Assessment of rechargeable energy storage systems for plug-in hybrid electric vehicles Ph.D. thesis, Vrije Universiteit Brussel, Brussel, Belgium, (2012).
• VDA-initiative energy storage system for HEV, test specification for Li-ion battery systems for hybrid and electric vehicles; VDA: Frankfurt, Germany, 2007.
• Battery Test Manual for Electric Vehicles, U.S. Department of Energy Vehicle Technologies Program, Revision 3.1, 2020.
• Battery Test Manual for Plug In Hybrid Vehicle, U.S. Department of Energy Vehicle Technologies Program, Revision 3, 2014.
• Hans-Georg Schweiger, Comparison of Several Methods for Determining the Internal Resistance of Lithium Ion Cells, Berlin, Germany, (2010)
• Anup Barai, Scientific reports of A study of the influence of measurement timescale on internal resistance characterization methodologies for lithium-ion cells, (2017)