YK-150-2200 320C（320E） Type Single Facer Machine 2 Ply Corrugated Cardboard Production Line
※Main technical parameters and requirements in production line
Type：YK-150-2200 single corrugated cardboard production line：
1. MAX. Produce width：2200mm ?Design speed：150m/min ?
?Economic speed：90-120m/min
Note：Production line speed test paper should meet the following requirements：（Equipment surface temperature not lower than 172 ℃ above）
Customer-owned section
1. Steam heating system：proposal with 1000Kg / Hr of a steam boiler , Pressure:1.25Mpa steam pipeline.
2. Air compressed machine、air pipeline、glue conveying pipe.
3. Power supply、wires connected to the operation panel and line pipe.
4. Water sources、water pipelines、buckets and so on.
5. Water, electricity, gas flush mounting civil foundation.
6. Test with the base paper,corn starch (potato), Industrial use caustic soda、borax and other material.
7. Oil equipment, lubricating oil, hydraulic oil, lubricating grease.
YK-2200 ZJ-V5B hydraulic shaftless mill roll stand
※Structural feature：?
★Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others，the lifting of the paper adopts hydraulic drive.
★Brake adjustable adopts multi-point braking system.
★Every stand matched two sets paper car , and they can paper on the both sides at the same time.
※Technical parameters：
1、The range of clamping paper：MAX2200mm MIN1000mm ?
2、Clamping diameters：MAX￠1500mm MIN￠350mm
3、Main shaft diameter of paper holder：￠242mm ???
4、Gas source work pressure（Mpa）: 0.4---0.8Mpa
5、Equipment size：Lmx4.3*Wmx1.8*Hmx1.6 ???????
6、Single weight：MAX4000Kg
※Hydraulic system parameters：
1. Work pressure（Mpa）:16---18Mpa ???????????????
2. 2. Lifting hydraulic cylinder：￠100×440mm ??
3. Clamping hydraulic cylinder：￠63×1300m ??
4. Hydraulic station motor power：3KW --380V -- 50Hz ?????
5. Solenoid valve voltage：220V ?50 Hz
Paper trolley, track
※Structural feature：
★The whole track buried，The main frame of the 14th Channel steel with ￠ 20mm cold drawn welded round，length of track 4510mm.
★Each paper holder matched two sets paper trolley, and paper on both sides at the same time.pull the roller paper to the right place.
※SF-320C fingerless type single facer
※Structural feature：
★Adopt hood suction structure，matched high pressure powerful fan. Gas supply and electrical control cabinet to focus on the same operation, the operating side full cover closed.
★High quality resin sand casting，wall thickness 200mm。Adopt independent gear box, Universal joint transmission structure.
★install the lifting trolley on the conveyor bridge,Need to use the car will tile roll assembly and pressure roller, such as convenient and quick.
※Technical parameters：
1、effective width：2200mm ????????????
2、operate direction：left or right（Determined in accordance with the customer's facility)
3、design speed：150m/min ????????????????????
4、range of temperature：160—180℃
5、air source：0.4—0.9Mpa ?????????????????
6、steam pressure：0.8—1.3Mpa
7、equipment：Lmx3.5*Wmx1.7*Hmx2.2 ???????????
8、single weight：MAX 7000Kg
※Roller diameter parameters：
领英推荐
1、corrugated roller：up￠320mm ?????down￠316mm ????????pressure roller：￠324mm ?
2 、glue roller：￠242mm ?????fixed paste roller： ￠140mm ?????preheat roller：￠402mm
SF-360EA multi-cassette positive pressure single facer
(Option)
※technical parameters：
1、effective width：2200mm ?????????
2、operation direction：left or right（Determined in accordance with the customer's facility)
3、design speed：200m/min ?????????????
4、temperature range：160—200℃
5、air source：0.4—0.9Mpa ??????????
6、steam pressure：0.8—1.3Mpa
7、corrugated flute:（UV type or UVV type）
※roller diameter parameters：
1、diameter of up corrugated roller： ￠360mm ??????
2、diameter of pressure roller：￠415m
3、diameter of glue roller：￠269mm ?
?4、diameter doctor roller ：￠153mm
5、diameter of preheater：￠400mm
DHE-150 Single corrugated the aspect Cutter
DHE-150 Single corrugated the aspect Cutter
※ Technical parameters：
1、The maximum working width：2200mm ??????????
2、Operation direction：left or right（Determined in accordance with customer plant）
3、The maximum mechanical speed：150m/min ????????
4、Mechanical configuration：Computer spiral knife crosscutting
5、Cutting length：300-1600mm ???????????
6、Minimum slitting width：180mm
7、Precision Cutter：±1mm（Uniform） ±1.5mm(Non-uniform) ??????
8、5 groups ￠200?blades
※Roller diameter parameters：
1、Cross on the knife shaft diameter：￠200mm ?Balancing done deal
2、Cross under the knife shaft diameter：￠200mm ?Balancing done deal
3、Under the pull roller diameter:￠156mm ???Balancing done deal
Note: After all have been grinding rollers, hard chrome plated at (upper and lower arbor exception) processing.
YK- 2200 2ply Corrugated Cardboard Production Line for 2ply corrugated paperboard making
YIKE GROUP 2ply Corrugated Cardboard Production Line
CHINA YIKE GROUP CO.,LTD
If any need,pls contact us at any time
whatsapp :wa.me/008613363699514
Email;[email protected]