WS2813 dual signal 5V 5050 RGBW pixel LED Strip 60pixels/m
WS2813 dual signal?5V?5050 RGBW?pixel?LED Strip 60pixels/m
Led type: 5050 SMD RGB LED
IC type: WS2813 with dual signal ,one pixel broken , donot affect next one work .
PCB Width:10mm
Led lighting angle: 120°
LED Q’ty: 60led/m,
IP Rating IP20, IP65, IP67, IP68.
Single-flow, gradient, chase, scan and other full-color effects;
Splicing to achieve text movement and video animation and other dynamic effects;
Can be bend and cut, can achieve a certain curvature and length of the modeling screen;
1 LED 1 IC, individual controlled, can be made into high-density high-definition display;
Advantages:
1.Each pixel can be controlled individually( One LED in one pixel)
Can show any color and Can be used as flexible led display screen to show image and video
2.White PCB and black PCB optional
3.2unce?PCB?board?with double cooper layer(hongqi brand
4.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board 5. It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
6. Flexible PCB material . ever 1 LEDcan be cut , there is cut lines ever?one led,
7. 30/60/144leds per meter?. 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip .
8. Controller System：SD controller , DMX controller , Artnet and so on .(SPI protocel)
9. Installing : screw+silicon clipand 3M adhesive on back side for sticky
10. waterproof Type