The Working Theory of Tricone bits

Tricone bit is one of the main tool for blast hole and well drilling. Its life span and performance whether suitable for drilling or not, that has an great influence about the quality, speed and cost of drilling project.

The rock breakage by the tricone bit is working with both the impact of teeth and the shear caused by slippage of the teeth, which bring high rock breaking efficiency and the low operation cost.

Tricone bit is connected with the drill pipe and rotates along with it, and drive cones which pressed on the rock together. Each cone rotates round the axis of its leg and simultaneously revolves around the bit center. The tungsten carbide inserts or steel teeth on the cone shell cause the formation to spall under the drill weight and the impact load from cone ratation, the cuttings will be discharged out of hole by compression air or with agent such as foam.

Each carbide insert or steel teeth pressed into the rock once with a certain depth of spall-pit on the rock. This limited depth of spalling seems to be approximately equal to the penetration depth per rotation of the bit. The teeth shape, the groove width and the crest length are all critical factors for rock breaking. With a comprehensive consideration of those factors such as the weight, RPM and air volume required for removing cuttings from the hole, the designers may reasonably manipulate the interrelationships among them and make the bits gain highly efficient penetration rate and longer service life and achieve optimum economic results.

Check out with DrillMore sales team to determine which drill bit would be best for you!

WhatsApp: https://wa.me/8619973325015

E-mail: [email protected]

Web: www.drill-more.com