BroadWave’s conduction cooled terminations are used in commercial and defense applications. #IEEEE #Microwave #RF https://lnkd.in/g-_Z49ck
Broadwave Technologies
电器、电气和电子产品制造业
Greenwood,IN 189 位关注者
We are a woman owned business manufacturing in the USA. Our specialty is cost effective application specific solutions.
关于我们
BroadWave Technologies is a leading manufacturer of test accessories, terminations, fixed attenuators and power dividers for the Aerospace, Automotive, Defense, Medical, Telecommunications, Test and Measurement markets. In addition to standard products BroadWave specializes in low cost custom components. All products are 100% tested. ? Impedance Matching Pads: Also called minimum loss pads. These devices are used to transform between different impedances. ? DC Blocks: Pass RF up to 23 GHz and breakdown voltages up to 500 Volts. Standard 50 and 75 Ohm (other impedances available) devices exhibit low insertion loss. Inner, outer and inner/outer designs are available. ? Feedthru Terminations: Designed to match RF components with high impedance test equipment such as an oscilloscope. Custom impedances are also available. ? RF Detectors: Available in positive and negative DC polarity from 100 kHz to 3 GHz. 50 and 75 Ohm units are standard. ? Conduction Cooled Terminations: Up to 250 Watts average power mounted to a customer provided heat sink. These devices are lower in cost and much smaller than convection cooled terminations. ? Convection Cooled Terminations: Up to 1,000 Watts average power with a traditional air cooled design. ? Fixed Attenuators: Precision and low cost models are available. DC passing and reverse polarity available for select models. Standard attenuation values are 1-40 dB. 50 and 75 Ohm are standard. ? Power Dividers: Resistive and reactive 50 and 75 Ohm units up to 6 GHz in 2-16 way configurations. ? RF Adapters: Same series and between series 50 Ohm adapters. DC-50 GHz depending on connector rating. ? Manual Variable Attenuators: Rotary attenuation selection up to 110 dB. 50 Ohm, DC-3 GHz. ? Programmable Attenuators: Electro-mechanical and solid state designs up to 2.5 GHz. Voltage controlled and TTL controlled 50 and 75 Ohm units are standard with attenuation up to 127 dB. Single step devices are also available.
- 网站
-
https://www.broadwavetechnologies.com
Broadwave Technologies的外部链接
- 所属行业
- 电器、电气和电子产品制造业
- 规模
- 11-50 人
- 总部
- Greenwood,IN
- 类型
- 私人持股
- 创立
- 2000
- 领域
- Impedance Matching Pads、Conduction and Convection Cooled Fixed Attenuators、DC Blocks、Power Dividers、Feedthru Terminations、RF Adapters、RF Detectors、Manual & Programmable Attenuators、Conduction & Convection Cooled Terminations和RF Passive Components
地点
-
主要
170 Airport Parkway
Suite A
US,IN,Greenwood,46143
Broadwave Technologies员工
动态
-
BroadWave 75 Ohm fixed attenuators lower signal amplitude without introducing much noise or distortion. #IEEE #Microwave #RF https://lnkd.in/gb4sec7h
75 Ohm Fixed Attenuator Series - Broadwave Technologies
https://www.broadwavetechnologies.com
-
BroadWave offers directional couplers from 500 MHz to 18 GHz with N or SMA connectors. #IEEE, #Microwave, #RF https://lnkd.in/gJRbf_dV
Directional Coupler Covers 7-12.4 GHz Frequency Range - Broadwave Technologies
https://www.broadwavetechnologies.com
-
These passive devices are essential to divide signals, are available in a wide range of output configurations, and are an indispensable RF component of mission critical communications. #IEEE #Microwave #RF https://lnkd.in/gGAjjq53
Public Safety Spectrum Power Dividers - Broadwave Technologies
https://www.broadwavetechnologies.com
-
BroadWave Technologies feed thru terminations are designed to match RF components with high impedance equipment such as amplifier inputs, meter inputs, and oscilloscope inputs. #IEEE #Microwave #RF https://lnkd.in/g2APDXjN
600 Ohm Feed Thru Termination - Broadwave Technologies
https://www.broadwavetechnologies.com
-
High Impedance Terminations We added three high impedance terminations to our product line. These loads are useful in simulating emergency operating conditions of solar panel and electric vehicle charging installations. #IEEE #Microwace #RF https://lnkd.in/gFkCPVgs
High Impedance Terminations - Broadwave Technologies
https://www.broadwavetechnologies.com
-
This between series RF adapter resolves mixed connector interconnect transitions with minimal insertion loss. #IEEE #Microwave #RF https://lnkd.in/gWXXfiyn
TNC Female to N Female RF Adapter - Broadwave Technologies
https://www.broadwavetechnologies.com
-
This line of low power fixed attenuators is ideal for critical communications applications. #IEEE #Microwave #RF https://lnkd.in/gpmEy7jg
Low Power Fixed Attenuator - Broadwave Technologies
https://www.broadwavetechnologies.com
-
Directional couplers designed by BroadWave provide an accurate method for sampling a signal. We offer couplers for most applications including power measurements, signal leveling, and frequency measurements from 500 MHz to 18 GHz with N or SMA connectors. #IEEE #Microwave #RF https://lnkd.in/gWZ9A3Un
Broadband Directional Coupler - Broadwave Technologies
https://www.broadwavetechnologies.com
-
From application specific connector configurations to DC blocking or DC passing specific ports BroadWave has the capability to manufacture power divider solutions for unique requirements. #IEEE #Microwave #RF https://lnkd.in/gFVjx_fN
Mixed Connector Power Divider - Broadwave Technologies
https://www.broadwavetechnologies.com