Why does your spiral dryer screen break easily?

First of all, what is a spiral dryer screen?

Spiral dryer Screen is a special paper machine clothing used in the dryer section of paper mills. It is also widely used in many industries such as food drying, non-woven conveying, printing cloth drying and so on. At present, for small and medium-sized papermaking equipment, the spiral dryer screen is the most widely used and the best suitable dryer.

Secondly, what are the characteristics of the spiral dryer screen?

1,Easy Operation.

Each spiral loop can be connected together. It’s?easy to installation and maintenance, And reducing downtime, extending seam life and saving costs.??

2,Large Air permeability.

The air permeability of the spiral dryer is large, which is beneficial to reduce the steam pressure of the dryer?cylinder, the drying speed is faster; the contact area is higher, so heat transfer is better, and the energy cost can be saved by 5-10%.??

3,Smooth surface.?

The surface of the Spiral dryer screen?is smooth and flat.

4,High strength & excellent wear resistance?

It can withstand greater tensile strength, making the sheet more close to the drying area, and the drying effect is better.??

5,Excellent heat setting effect.?

Excellent heat setting effect, make the spiral dryer screen stable in dimension and has excellent resistance to distortion,it always running smoothly and will not deflection.

In addition, what kinds of spiral dry nets are there?

According to the yarn diameter and spiral ring size, we have big, middle and small loop spiral dryer screen. The big loop use thicker yarn to get superior tensile strength and ventilation, small loop has thinner yarn, lesser air permeability and fine surface.In addition, we can also adjust the design of the spiral dryer according to customer requirement or paper machine parameters to meet the actual requirements of customers.

Finally, Why does your spiral dryer screen break easily?

we believe you who are reading this article have encountered the following problems more or less in the process of using the spiral dryer screen:

1. In the process of use, the spiral dryer screen is deformed?

2. After using, the glue edge of the dryer screen is loose?

3. Only use 1 month, the dryer screen was worn out and damaged?

4. What's more, when upload on the machine, then found that the size of the dryer screen was wrong, or tight on both sides and loose in the middle?

......

If these problems bother you, pls keep reading!

Why does your spiral dryer screen break easily?

No1, Is it the low-quality glue that your spiral dryer uses?

If your spiral dryer screen is prone to loose glue edges during use, it may be because the manufacturer of the dryer screen uses low-quality glue in order to save costs, causing the glue edges to be in operation. Easy to wear, crack and loose.

No2,unstable operation? Is the manufacturer's heat setting process bad?

Stable operation of all dryer screen, including forming fabrics, is a very important criterion, which is directly related to whether the paper mill can ensure the smooth maintenance of daily production.

So what kind of situation will lead to unstable operation of the backbone network? In fact, the most important factor lies in the production process. The biggest problem is the heat setting process after removing the raw materials.

If the manufacturer’s heat setting equipment is not advanced enough, or the heat setting process is not standard enough, it is likely to cause the dry network to run instability, and even the wrong size, tight middle, and loose ends.

Of course, in addition to the above reasons, in actual operation, I believe you may still encounter various problems, perhaps because of incorrect operation or incorrect maintenance methods that shorten the spiral dryer screen's work Life.

If you have more questions, welcome to contact me. Our senior technical team and I have more than 11 years of industry experience. If possible, we will do our best to help you.

Product Manager & International Manager?

Henan Jingxin Fabric Technology Co.,ltd.

Email:[email protected]/[email protected]

Mobile/whatsApp/wechat:?+ 86 13673995389

Operational Address:North County Industrial Part, Shenqiu County, Shenqiu, zhoukou city, Henan province, China.

Website:www.jingxincorp.com?