Why Does My Temperature Change Between My Circ System and the Point of Application?

The modern paint shop is a maze of pipes and tubes carrying paint all over the place! Some of these circulation systems even have temperature control systems designed to make sure that the paint temperature is controlled as it is circulated. So why is paint temperature still such an issue?

The Circulation System as Safe Haven

As long as the paint is circulating in the system, though it may be exposed to pressure and shear and friction (Oh my!) it is still relatively safe and, every time it passes through the heat exchanger (on every loop through the system) it comes back to the setpoint temperature, so it’s relatively stable. Consequently, it makes sense that it should be stable when it is applied, right?

We’ve worked with plenty of these systems and done plenty of measurements at the point of application and, as it turns out, this is rarely the case. In fact, this chart from a major automobile manufacturer with a temperature control system in the circulation loop shows a 13°F variation at the point of application over the course of just 5 days in mid-May.

So, how can this be?

All Good Things (Have to Come to An End)

The problem is, to get to a part, the paint has to leave the safety of the circulation system and travel to a gun or bell to be dispensed. That’s where the fun starts…

When the paint leaves the circ system, it travels through progressively smaller tubing until it reaches the gun or bell. There will be pressure regulators and flow meters and color changers (Oh my!) along the way. All along the path, the volume of paint gets smaller and it is in contact with more and more surface area. This may be stainless steel, it may be Teflon, it may be nylon, or it may be any of a host of other materials. And the paint may slow down – in some instances it may stop altogether for periods of time. These are perfect conditions for temperature exchange. In fact, the principal behind a shell & tube heat exchanger is to reduce the volume, increase the surface area contact, and extend contact (dwell) time by temporarily reducing velocity – all by splitting up the paint flow into a bundle of smaller tubes!

The Path Through Ambient

The path to the booth may be down from the truss level overhead where it is exceedingly warm, or it may be up from the basement or a trench where it is cool. Regardless of where it’s coming from on its way to the booth, it is exposed to an ever-changing ambient. Changing from day-to-night and season-to-season, this is where the change in temperature becomes consistently variable and totally unpredictable.

But My Pipes Are Insulated…

We hear this a lot. And insulating is a good thing. But the reality is, insulation is a tool that slows temperature change, it doesn’t stop it. That’s why insulating your house doesn’t obviate the need for a furnace! Furthermore, we generally only insulate the supply lines (ostensibly to save cost), and we only insulate the circulation system. We generally ignore the drops and all the myriad components between the circ system and the point-of-dispense. It is understandable, given the level of complexity involved in insulating the twists and turns and devices in the path, yet as we have already noted, this is where the bulk of the temperature change takes place.

A Single Solution

Centralized temperature control systems designed to protect and control the paint as it flows through the circulation system are widely used and can be a very important tool in the overall control of the process. But this is ill-equipped to address the variations at the point-of-application – where the actual business of creating a uniform, high-quality finish is performed. For that, a specialized control system is required – a system that can eliminate those variations that are introduced between our carefully controlled circulation system and our applicator.

For more information, check out our video: The Evolution of Paint Temperature Control on our YouTube Channel.

Topics: Point of Application, Industrial finishing, automotive painting, robotic painting, paint temperature control, paint surface finish, automotive paint finishing, automotive finishing