Why Choose the Sofema Aviation Services & Sofema Online EASA Part CAMO Safety & Human Factor Training Requirements (Initial) 3 Days Course?

Special Offer - Enrol now to the SofemaOnline training with Voice Over at the Special Price of 125 Euro/delegate*

* Available until 28th February 2021

Effective 24 March 2020 EASA with the introduction of Part CAMO has created a requirement for Initial and Recurrent – Integrated Safety & Human Factors Training.

By September 2021 all European CAMO Organisations should transition to Part CAMO and will need to demonstrate mandatory compliance with Safety & Human Factor Training in Accordance with GM2 CAMO.A.305(g)

This course satisfies the initial training obligations related to Safety Management Systems within a CAMO environment with due consideration to Human Factors (HF).

·         What is the correct length for the Part - CAMO SMS – HF Course?

·         Why Does it take 3 Days for PART CAMO HF but only 2 Days for EASA Part 145 Maintenance Human Factors (MHF)?

·         Where can I receive Classroom or online training for PART CAMO SMS?

Sofema Aviation Services (SAS) provides the answers:

SAS has been delivering human factors training in an EASA Part 145 environment for more than 12 years. In addition, we deliver the following courses:

·         Maintenance Error Management System Training (MEMS) and

·         MEMS Training for Trainers

·         Accident Investigation Training in an EASA Part 145 & CAMO environment

The answer is that the existing initial Human Factors Course (as delivered to EASA Part 145 Organisations is 2 days duration) – to this is added the content related to Safety Management Systems – which takes a good part of 1 day to effectively communicate to a receptive audience.

It is, for this reason, the program takes 3 days – the entire course runs to approx. 900 slides and is one of the most comprehensive courses we have ever put online with a voice over.

The course “faithfully” follows the guidance material referenced in GM2 CAMO.A.305(g) and shown below.

Part CAMO Safety & Human Factor Initial Training - Enrol now online at ↓ https://sofemaonline.com/lms/courses/264-easa-part-camo-safety-sms-amp-human-factor-hf-training-initial-with-vo/preview

For Group Discounts please email [email protected]

Detailed Content:

The following subjects are addressed in the training program:

Day 1

Introduction

Contents

Abbreviations & Definitions

1 General/Introduction to Safety Management and HF

• 1.1 Need to address safety management and HF
• 1.2 Statistics
• 1.3 Incidents (Incidents Attributable to Human Factors/ Human Error)
• 1a. Safety Risk Management
• 1a.1. Hazard identification & 1a.2. Safety Risk Assessment
• 1a.3. Risk Mitigation and Management
• 1a.4. Effectiveness of Safety Risk Management

2 Safety Culture/Organisational Factors

• 2.1 Justness/Trust
• 2.2 Commitment to safety
• 2.3 Adaptability
• 2.4 Awareness
• 2.5 Behaviour
• 2.6 Information

3 Human Error

• 3.1 Error models and theories
• 3.2 Types of errors in continuing airworthiness management and
• maintenance tasks
• 3.3 Violations
• 3.4 Implications of errors
• 3.5 Avoiding and managing errors
• 3.6 Human reliability

Day 2

4 Human Performance & Limitations

• 4.1 Vision
• 4.2 Hearing
• 4.3 Information-processing
• 4.4 Attention and perception
• 4.5 Situational awareness
• 4.6 Memory
• 4.7 Claustrophobia and physical access
• 4.8 Motivation & Demotivation
• 4.9 Fitness/Health
• 4.10 Stress
• 4.11 Workload management
• 4.12 Fatigue (Sleep, Fatigue & Shift Work)
• 4.13 Alcohol, medication, drugs
• 4.14 Physical work
• 4.15 Repetitive tasks/Complacency

5 Environment

• 5.1 Peer pressure
• 5.2 Stressors
• 5.3 Time Pressure and Deadlines
• 5.4 Workload
• 5.5 Shift work
• 5.6 Noise and Fumes
• 5.7 Illumination
• 5.8 Climate and temperature
• 5.9 Motion and vibration
• 5.10 Complex systems
• 5.11 Other hazards in the workplace
• 5.12 Lack of manpower
• 5.13 Distractions and interruptions

Day 3

6 Procedures, Information, Tools and Practices

• 6.1 Visual inspection
• 6.2 Work logging and recording
• 6.3 Procedure — practice/mismatch/norms
• 6.4 Technical documentation — access and quality

7 Communication

• 7.1 Shift/Task Handover
• 7.2 Dissemination of Information
• 7.3 Cultural differences

8 Teamwork

• 8.1 Responsibility
• 8.2 Management, supervision and leadership
• 8.3 Decision-making

9 Professionalism and integrity

• 9.1 Keeping up to date; currency
• 9.2 Avoiding error-provoking behaviour
• 9.3 Assertiveness

10 Organisation’s Safety Programme

• 10.1 Safety policy and objectives, just culture principles
• 10.2 Reporting errors and hazards, internal safety reporting
• scheme
• 10.3 Investigation process
• 10.4 Action to Address Problems
• 10.5 Feedback and Safety Promotion

Next Steps

Enrol now online - https://sofemaonline.com/lms/courses/264-easa-part-camo-safety-sms-amp-human-factor-hf-training-initial-with-vo/preview

For Group Discounts please email [email protected]