When the salt spray test chamber to add water, what should be paid attention to?

Salt spray resistance test chamber is used to examine the ability of the salt spray corrosion of the material and its protective layer, as well as the process quality comparison of the similar protective layer, and can examine the ability of some products to make salt spray corrosion; When the equipment is added in different locations of water, because of its different locations of water, the matters to pay attention to are different, these words are to remember, so that we can use the equipment for a long time. Here are the details:

First, add water to the salt tank

The brine is equipped with a ratio of 1∶19 into the brine box of the salt spray resistance test chamber, and the water configured must be pure water or distilled water.

Second, water tank sealing water

Water tank can use tap water to seal the box body, add water to the location of the drainage outlet.

Third, salt spray resistance test box inside the water

Add pure water or distilled water to the equipment box, the amount of water is generally 100L-200L.

Fourth, add water to saturated bucket

The saturated bucket is marked with transparent water level. When adding water, observe the actual water level and the position of the highest water level of the saturated bucket in the salt spray test chamber.