WHEN EVERY DROP COUNTS...

CADCON Dished Ends - machined from solid

Rattiinox is pleased to present a range of innovative dished ends (Patent pending) to guarantee effective mixing of valuable pharmaceutical and biotech products in small vessels and in larger tulip-style vessels.

The mixer is offset for maximum mixing efficiency and the end slopes to the outlet for optimum drainability - maintaining mixing, sampling and temperature measurement down to an absolute minimum volume

These dished ends feature a built-in Rattiinox CADCON 1” aseptic connector to suit a Rattiinox CAD extended-diaphragm tank outlet valve size 1/2“, 3/4" or 1" (with or without satellite CIP/SIP valve - up to & including 1" for full CIP downstream behind the seat of the main valve...) and two additional CADCON 3/4" aseptic connections for sampling valve and temperature probe mounting

The unique Rattiinox extended 316L-reinforced PTFE diaphragms ensure valve closure extremely close to the vessel internal surface - avoiding the unmixed and cold pocket typical of weir-type valves.

The famous cleanability of the Rattiinox valves (#1 for Clean by Design) guarantee rapid & robust CIP

We are building a stock of blank ends 150, 200, 250 and 300 mm diameter.

We - or the vessel manufacturer - can then machine the hole to weld-in the magnetic mixer post.

CADCON Dished Ends Vs. integral units (valve bodies machined from the same piece of material as the dished end - we can also supply these...):

• Flexible design: the same device can be used for multiple configurations
• Faster delivery time: standard units ready in stock
• Earlier pressure test: outlet valve, sample valve and temperature sensor can all be replaced with blank tri-clamp covers for vessel pressure test

Please see our valves on the Edge Solutions stand 14.C32 at CPHI & PMEC India 29 November - 1 December 2022 - Please speak to Gururaja Subbarao

Please watch our new video: www.rattiinox.com