What is Z Type Belt Conveyor

Z-type belt conveyor is called climbing belt conveyor by users in the light industry, and it is called high-inclination belt conveyor in the industrial and mining industry. Because of its large conveying angle, it is a conveying that ordinary belt conveyors cannot achieve Angle, so the Z-type belt conveyor is adopted for the equipment conveyed at a large angle. The conveying angle is above 30° and below 90°, and the best conveying angle is 70°.

The Z-type belt conveyor is divided into an upper horizontal section, a lower horizontal section, and a slope section. The lower horizontal section is the feed end, and the upper level is the discharge end. The lower level of the common Z-type large-inclination belt conveyor will be equipped with a hopper . The Z-type belt conveyor has a small footprint and a large conveying capacity. It is mainly used for the lifting conveyor of materials. Therefore, some customers call it a belt elevator, which can replace the bucket elevator. It has been widely used in steel plants and boilers. Coal conveying system, concrete mixing station and other industries, it is a good partner for production equipment in various industries.

The structure of the Z-type belt conveyor is that there are free-to-expandable rubber corrugated vertical "skirts" on both sides of the flat rubber conveyor belt, and a transverse partition with a certain strength and elasticity is glued between the skirts to form a box-shaped bucket. Continuous conveying is carried out in the bucket. The Z-type belt conveyor transports various bulk materials with a specific gravity of 0.5-2.5t/m3 within the ambient temperature range of -19°C to +40°C. For conveying materials with special requirements, such as high temperature, materials with acid, alkali, oily substances or organic solvents, special sidewall conveyor belts are required. Users can choose the appropriate model according to the output delivered.

https://www.dahanmachine.com/product-center/Z-Type-Belt-Conveyor.html