What are Varnish and its effects?

The condition of the oil in?lubrication and hydraulic systems?is indicative of the entire system's health. There are two essentials for ensuring productivity, avoiding malfunctions, and reducing operating costs:

1. Monitoring the fluid condition
2. Continuous maintenance of operating equipment

Varnish is a soluble, insoluble contaminant made up of by-products of oil degradation and oxidation. It can appear as a gel-resin-like consistency or resemble solid deposits in the oil or plate on the metal surfaces of lube systems. It can result from several possible root causes, including high temperatures, electrostatic discharges, lubricant degradation, and micro dieseling. Varnish can produce several problems related to machine operation, such as valve stiction, lubricant flow restriction, clogged filters, etc.

How is Varnish different from Sludge??

Varnish is a tough, adherent oxide or carbonaceous material that coats internal machine surfaces. Hot surfaces and/or time will often cure varnish to a hard/brittle consistency.

In contrast, sludge, sometimes a precursor to varnish, is soft and sticky and can move about the system until finally coming to rest at sump bottoms, troughs, strainers, filters, and narrow fluid passages.?

To summarise, the prime reasons for varnish generation are the following:

1. Pressure-induced thermal degradation.
2. Pressure-induced dieseling
3. Oxidation

Is your system susceptible?

There are several reasons lube oils suffer from high rates of varnish contamination. If your system ticks any of these boxes, then you should test your oil for varnish potential,?Oil Check call? +91 7030901267

? Visible deposits or discoloration of lube circuit components?

? If you switched from Group I to Group II oil, or if you have blended oils?

? High flow rate of lube oil from a small lube oil reservoir?

? High operating temperature?

? Gas turbine, gas compressor, or hydraulic system

How to physically?identify if there is a change in the chemical composition??

The following can be the warning signs that the oil has undergone chemical changes.

• Change in oil colour?
• Strong odour
• Change in oil consistency
• Sludge and hard deposits on metal surfaces?
• Visible contaminants in oil samples

If you are facing varnish deposits, two actions are recommended to control them. First, identify the root causes. This will require a systematic study of the possible factors supported by oil analysis. Next, remove the existing varnish in the machine.

At?Minimac Systems,?we offer?Flushing Services?and?Filter Check Services,?which ensure a clean system, including oil tanks and lines. Book an appointment with our technical expert by clicking on?https://www.dhirubhai.net/company/minimacsystemsprivatetlimited?

or Call Us at +91 7030901267. Email Us - [email protected]

Like, Comment, and Share this article to spread awareness and sensitize the reader for Zero Mechanical Breakdown