The FRP absorption tower is made of flame retardant vinyl unsaturated resin as matrix and alkali - free non - twist glass fiber as reinforcement material through several production processes. The exterior adopts aging resistant flame retardant polyester resin; The exterior is made of aging-resistant and flame-retardant polyester resin, which is a circular overlapping piecewise assembly structure.
FRP absorption tower is mainly suitable for nitric acid, sulfuric acid, chromic acid, paint, smoke and other waste gas treatment; Not only can help customers to create a good space environment; Can also help customers to recover the waste gas in the loss of gold and silver.
So what problems should we note when install FRP absorption tower?
- 1) Pay attention to protection during transportation and installation, besides do not touch the body and parts.
- 2) If FRP absorption tower install and work outdoor, we should pay attention to the bottom of the pool site anti-freezing in winder.
- 3) When installing the fan, prevent sundries from falling into the fan. After the installation of the purification tower, before the test run, the debris and dirt in each circulation system should be carefully checked and removed to avoid blockage.
- 4) Due to the general FRP flammable, acid fog purification tower installation and maintenance process, is strictly prohibited to use open flame. Each flange shall be sealed to prevent gas escape and leakage.
- 5） The absorption solution in FRP absorber tower is sodium hydroxide solution, and the solution concentration should be kept in the range of 6%. When the concentration of sodium hydroxide solution is lower than 4%, sodium hydroxide solution must be added. The waste liquid in the purification tower should be replaced regularly according to the actual situation.
- 6) There must be a special person responsible for the management of the absorption tower, and often check whether the fan is running normally, whether the water pump is running normally, whether the liquid level is normal, whether the sodium hydroxide solution is in the prescribed range, and so on. If problems are found, they should be solved in time.
If you want the FRP absorption tower details, please let me know.
