What issues should be considered in the selection of ultrasonic vibrating screen models?

Ultrasonic vibrating screen is extended from ordinary vibrating screen, low-amplitude and high-frequency vibrating screen equipment. However, many users do not know how to choose the vibrating screen, so today I will give you a brief introduction as follows:

1. Determine the material mesh and characteristics.

Ultrasonic vibrating screen is mainly for fine powder materials or materials that are easy to block the mesh.

If the mesh number of the material is more than 300 mesh or there are screening problems such as easy blocking, adsorption, sticking, static electricity, light specific gravity, etc., the vibrating screen can be considered.

Three-dimensional rotary vibrating screen or linear vibrating screen can be used for easy screening below 300 mesh.

Second, the size of the screen

Ultrasonic vibrating screen models are: the suffix number here is the size of the screen surface of the screen machine.

The diameter determines the size of the output, so generally, the customer will be asked how much the output is.

3. Material of ultrasonic vibrating screen

The material of ultrasonic vibrating screen can be divided into two types: one is 304 stainless steel for the contact part with the material, and the other is 304 stainless steel for the whole machine.

4. Screen accessories of ultrasonic vibrating screen

The main accessories of ultrasonic vibrating screen are: power supply, transducer, vibration motor.

The vibration motor is the power source for the operation of the vibrating screen. The quality of the motor is directly related to the service life and output of the vibrating screen.

"What should be considered for vibration screening type?" As shown above, you can choose according to the above.

If you need screening equipment, you can send me a message or log in to our network"

The internet: