What is the internal cause of the hose burst?

The internal cause of hose bursting is that the hose strength is difficult to withstand excessive pressure, but it is very difficult and economical to increase the strength of the hose. The external cause is mainly two aspects, that is, the pressure limiting valve opening pressure is too high and the operation is improper. Both of these factors can be artificially controlled. The hose burst failure can be avoided and reduced.

Therefore, there are three main aspects to prevent the hose from rupturing:

First, check the hose frequently. Found that aging cracks, oil spills, etc., immediately replaced, even if it is a very slight crack, never hesitate to avoid greater damage caused by hose rupture.

The second is to check the pipe pressure frequently. If the pressure is too high, further check and adjust the safety valve to clean and adjust the pressure to the rated value.

Third, when excavating the work correctly, be sure to avoid overloading the bucket. When the shovel meets stones and the concrete is metal, please choose another excavation point. Do not dig hard to avoid damage to the parts and hose.

Contact us （Hose manufacturer）

Hebei Orient Rubber & Plastic Co., Ltd.

Email:[email protected]

whatsapp/wechat：0086-18131105602

https://www.facebook.com/orienthose/

https://www.dhirubhai.net/company/4805968/admin/