What is electronic crane scale measurement and correct use Method

Correct use of electronic crane scale:

1:Before using the electronic crane scale, load the corresponding battery into the scale body and the handheld device. When installing or replacing the battery, tighten the battery clamp locking screw, check whether the battery clamp is firmly fixed on the scale body, and then hang The scale door is closed and locked to prevent accidents. When the meter displays undervoltage, the battery pack should be replaced immediately, and the replaced battery should be charged in time to prevent battery damage. When the battery pack is not used for a long time, it should be charged once at intervals. The battery should be stored in a dry, ventilated and suitable temperature environment and avoid contact with corrosive substances. When loading and unloading the aviation socket of the battery pack connection line, do not grasp the wire clamping cap that clamps the wire with your hands, but grasp the base. The power supply on the other side of the transmitter is connected to the aviation plug and do not grab the wire clamping cap, but the head The rotatable cap can be installed and removed to prevent the power connection from loosening and causing malfunction. Before the transmitting device is switched on, the antenna and its feeder must be connected reliably, otherwise the transmitting device will be damaged.

2:Avoid heavy lifting and collision of the electronic crane scale

Many electronic components inside the electronic crane scale, such as integrated circuits, quartz crystals, sensors, displays, etc., when the electronic crane scale is subjected to severe collisions, these components may be damaged, causing the electronic scale to malfunction, affecting the accuracy and affecting normal use. To prevent the scale body from colliding with other objects or falling from high altitude, the instrument should be handled with care and not placed randomly to prevent unnecessary loss. When the instrument is fixed on the crane, vibration reduction measures should be taken to avoid affecting the reliability.

?

3:Do not disassemble the parts on the electronic crane scale at will

When the electronic crane scale is in normal use, do not disassemble the parts on the electronic scale at will, let alone open the sealing port on the sensor, disassemble the integrated circuit and other components on the instrument. The necessary maintenance must be under the guidance of relevant technical personnel or have Carry out after certain maintenance knowledge to prevent the malfunction from expanding.