What is an ATA and do you need one for SIP?
Josh Hatch
Procurement Optimization | UCaaS | CCaaS | Cloud Migration | DRaaS | Telecom Expense Management | Communications
What is an ATA?
Old analog systems are slowly going offline. Many countries are already well on their way to?analog switch-off compliance by 2025. However, employees still spend about 200 minutes per day on the phone, so voice communications systems are far from shutting down. That is one reason why?70% of all Canadian and U.S.?businesses use SIP trunks for these calls now.?
When your company?switches to a SIP trunk line, you may want to keep all the customizations and features of your legacy Private Branch Exchange (PBX) system. That’s where the answer to “What is an ATA?” comes into play.
The acronym ATA stands for Analog Telephone Adaptor. It’s a device that bridges standard telephones and PBXs to a network so calls travel over the internet instead of directly over copper wires.
There are several different kinds of ATAs. All of them are a physical bridge between a phone and a network device. Some adaptors perform analog-to-digital conversion and connect directly to a Voice over Internet Protocol (VoIP) server. Other ATAs use software rather than hardware to perform the tasks.?
The simplest type of ATA uses a USB connector to attach to a server, computer or other internet-connected devices. At the other end, one or more R-11 jacks allow connection to telephones, faxes, and more. These adaptors look like a simple box.
This type of ATA depends on software to digitize voice data to be transmitted over the internet. It is meant for a single line, not for a PBX. It can cause garbled or incomplete calls when used with a PBX.
In a business setting, the usual ATA has a bank of telephone jacks and an RJ-45 connection to a LAN 10/100BaseT Ethernet hub. The ATA digitizes voice data, and it is a VoIP gateway.
What Is VoIP?
VoIP means that you can make phone calls that travel via the internet rather than through analog phone lines. VoIP takes analog voice signals and translates them into digital signals that travel via broadband lines.???
Before VoIP, voice and fax calls traveled via the Public Switched Telephone Network (PSTN). This is the same network that is now slowly going offline. Despite analog calls being reliable and straightforward, they aren’t flexible enough for current business needs. For instance, they do not allow for video conferencing, messaging, chat or document sharing, all of which are now work norms.
When you want to add or remove lines, include new devices or change addresses, you need to bring in a technician and purchase hardware. The technology is static versus mobile, requiring users to be onsite to utilize any functionality.??
On the other hand, VoIP phones work using internet protocol instead of phone lines. It relies on the internet to deliver your calls and uses a server in the cloud to perform switching and routing duties. An on-site router connects calls to the internet. Signal packets travel outbound to the receiving telephone (also internet or traditional.)
Because VoIP works via the cloud, your people can work from anywhere at any time as long as they have an internet connection. If you have a remote workforce, VoIP or a similar cloud-based technology is a must.
VoIP connects to virtually any device. You can effortlessly add smartphones and desktop software, among others. Employees can even use their personal devices as long as your organization has adequate security measures in place.?
Why Keep Your Old PBX?
Your legacy PBX could act as the bridge between the phone company lines and your business. The ATA would then serve as the bridge between your company and your SIP trunk service. The right kind of ATA makes this transition seamless.?
PBX systems aren’t new. They have been used for decades to handle call routing and switching between businesses and the telephone network. A PBX is usually a large, expensive machine located at a company’s office. It can’t be easily expandable or changed. If you have one, you probably count on your current PBX programming to:
The pandemic forced many people to work remotely, and businesses could not take valuable time out to reprogram and retrain employees for a phone system. As mentioned in the section “What is ATA?”, SIP trunks became more popular to solve this problem. For companies that needed to maintain their PBX functionalities, ATAs were necessary.
If you choose to keep your existing PBX, SIP trunks give you the flexibility to take advantage of?low-cost calling. In a per-line cost comparison, the use of VoIP technology can save at least 40%, possibly more.
领英推荐
What If You Don’t Want to Keep Your Old PBX?
Another viable scenario for companies is to remove their PBX system altogether. In the past, the only solution would have been a “forklift upgrade,” where you put the old system on a truck and replaced it with a new one.?
Today, a hosted PBX is the option. It moves the phone system’s configuration and maintenance responsibilities to a service provider. You handle only the handsets and cords, while the service provider does the complex programming and configuration.?
Hosted systems locate the PBX at the service provider’s center. This frees up your valuable real estate.?
There are some out-of-pocket costs, such as all new handsets, cords, etc., but this could be a solution with multiple other benefits:
If you are a legacy PBX owner, you know that maintaining a PBX on-premises requires expensive IT technicians with telecom experience. Also, consider capital outlay and depreciation of the equipment, plus the cost of the space that houses it.
A cloud-based PBX gives you the functions you want for a monthly charge and a minimal capital outlay. These are expensed annually instead of counting as depreciable assets.??
When looking for a PBX, you want one that is flexible and scalable. A cloud-based system only requires a few keystrokes to make changes, increase or decrease the number of extensions, add or change locations, access the system, and manage it from anywhere with an internet connection.?
In combination with a premium SIP trunk service, you could have a large corporation system at small-business prices.
Is There an Alternative to Legacy or Hosted PBX?
At this point, the question “What is ATA?” becomes unnecessary. If you choose PBX as a software service, software controls everything you need: You load it on a PC or the local server you own or control, and that’s it.?
You could hire a consultant to help you get started, but most infrastructures allow for DIY configuration and customization. Top providers will offer compatibility with almost all open source systems.?
Clear Voice Communications With SIP Trunks
In the past, VoIP calls were easy to distinguish. They exhibited poor sound quality and unreliable communications. A modern, stable SIP trunk eliminates these challenges. VoIP systems today offer call quality virtually indistinguishable from traditional wired systems at a fraction of the cost.
There are far fewer call-quality concerns on modern systems. Voice calls that use a high-quality, stable SIP trunk service don’t have mangled or dropped calls.?
Internet service quality is of concern, but with sufficient up/down bandwidth to simultaneously handle voice and data, there are no call quality issues. Most virtual PBX systems allow you to select one service provider to simplify billing and resolve many support challenges.
A credited SIP trunking service provider will allow you to bring your bandwidth or PBX and recommend the best equipment for your business.?
How to Choose the Right SIP Trunk Service
Choosing the right SIP trunk service is critical to make the most out of your migration from the old copper line systems.??
It is helpful for you to determine if you want to keep a legacy PBX with the switch to VoIP.?Don’t just look at call quality, but compare costs. A legacy PBX may be ideal if your system has many customizations or remains a tax asset.?
PBX systems as software, on the other hand, mean that you can handle the responsibilities for configuration and maintenance. No calling IT needed because of incorrect call routing, poor sound quality, or dropped calls. You can quickly do the maintenance online.?
SIP.US trunk service can help you create a flexible phone system that works for your business. Can your PBX handle work pattern shifts or seasonal variances.? Let us help you explore your options.?Contact us now?and get started for free.