Waveshare RM520N-GL 5G MUTZE for Raspberry Pi mit Etui Quad Antennen LTE-A Global

Features At A Glance

• Comes with the Quectel RM520N-GL 5G Sub-6GHz module, supports various network standards such as 5G/4G/3G and LTE-A, GNSS positioning support
• Comes with M.2 TO 4G/5G HAT, compatible with the RM500U-CN/RM500Q-GL/RM502Q-AE/RM520N-GL series 5G modules
• USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano to enable high speed 5G network
• Standard M.2 B KEY slot, compatible with SIM7600X/EM06X/SIM82XX/RM5XX series 4G/5G M.2 modules
• Onboard control pins, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
• Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable and flexible power supply
• Onboard power supply switch, reset button and LED indicator, easy to turn on/off the module and monitor the operating status
• 2x SIM card slot, dual card single standby, switchable via AT command
• High efficiency power supply circuit, up to 3A output current
• Comes with metal case, supports wall and rail mounting, more convenient for installation

Multi-Constellation High-Precision GNSS

Supports GPS, Beidou, Glonass, Galileo, QZSS

1. Raspberry Pi GPIO header for connecting with Raspberry Pi
2. DIP switches Enables the power control and reset pins
3. M.2 slot Compatible with most SIMCom and QUECTEL 4G/5G modules in M.2 form factor
4. SIM card slot 1 one of the 2x SIM card slots, dual card single standby
5. USB3.1 port USB 2.0 compatible, for connecting with different hosts
6. USB Type-C port 5V 3A input, stable and flexible power supply
7. Audio jack SIM7600X/SIM8XXX series supports audio function, but RM5XX/EM06XX series temporarily does not support this function
8. Antenna connector Supports quad antennas
9. Reset button
10. Power supply switch Switch the power supply mode: When set to USB, the module is powered via the "5. USB3.1 port" When set to EXT PWR, the module is powered by the external power supply via the "6. USB Type-C port"
11. Cooling fan Better heat dissipation for both Raspberry Pi and the 5G module
12. Indicator Easy to monitor the operating status of module
13. 13. Cooling fan Better heat dissipation for both Raspberry Pi and the 5G module
14. SIM card slot 2 Switchable via AT command
15. Module settings switch Switch A to ON for SIM7600X/A7906X/SIM7906X/SIM7912X series 4G M.2 modules; Switch B to ON for SIM8202X/SIM8200EA/SIM8262X series 5G M.2 modules; Switch C to ON for RM50X/RM520N-GL/EM06X series 5G/LTE-A M.2 modules
16. USB 2.0 interface pads
17. NAU8810X Audio Chip For SIM7600X/SIM8XXX series modules, RM5XX and EM06XX series modules temporarily does not support this function
18. Fan Header 5V cooling fan power supply