Water Softener System from Green Aqua Filling Machine Co Ltd.Http://www.green-aqua.com.cn
Water softener benefits: The automatic water softener is an ion-exchange water softener with fully automatic control during operation and regeneration. It uses sodium-type cation exchange resin to remove calcium and magnesium ions in the water and reduce the hardness of the raw water to achieve the purpose of softening hard water and avoid carbonate in the pipeline. , Containers and boilers have fouling. It greatly saves investment costs while ensuring smooth production.
Water Softener Types: There are two commonly used water softening technologies for water softeners. One is to remove calcium and magnesium ions from the water through ion exchange resins to reduce water hardness; the other is nanocrystalline TAC technology, namely Template Asisted Crystallization, which uses nano The high energy generated by the crystal packs the free calcium, magnesium, and bicarbonate ions in the water into nano-scale crystals, thereby preventing the free ions from generating scale. Compared with tap water, soft water has a very obvious taste and feel. Soft water has high oxygen content and low hardness. It can effectively prevent stone disease, reduce the burden on the heart and kidneys, and is good for health.
Working Process:Work (sometimes called water production, the same below), backwashing, salt absorption (regeneration), slow flushing (replacement), and fast flushing. All the processes of different softened water equipment are very similar, but due to the actual process or the need for control, there may be some additional processes. Any water softening equipment based on sodium ion exchange is developed on the basis of these five processes (among which, fully automatic water softening equipment will increase the brine reinjection process).
Regeration:Water softening equipment (Water softening equipment) is completely regenerated to the next failure of water production, which is related to the working exchange capacity of the resin, the filling amount of the resin, the hardness of the raw water and the working condition of the softening device. Periodic water production needs to be monitored during operation.
The total amount of calcium and magnesium ions contained in the water is called the total hardness of the water. It is easy to form insoluble precipitates (scale) in the process of daily life and industrial water use, which will bring many inconveniences to life and production, such as: hardness High cooling water will cause scale formation in the heat exchanger, seriously obstruct the water flow path, greatly reduce the heat exchange effect, and cause perforation corrosion to damage the equipment; when used as boiler water, it will scale on the heating surface of the boiler, and the thermal conductivity will change. Poor; textile printing and dyeing will cause spots on the fabric, affecting the appearance and quality of the product, and so on. The working principle of the softener is to use the exchange effect of the groups in the ion exchange resin to remove the hardness components in the water such as Ca2+ and Mg2+ by plasma replacement to achieve the purpose of softening the hard water and reduce the damage caused by the scale in the subsequent pipelines and equipment. Extend the service life of the equipment. The water hardness after single-stage or multi-stage softener treatment is ≤0.02mmol/L. The failure of the softener needs to be regenerated with sodium chloride, and the operation is extremely convenient.