Types Of Pumps
Mechanical Engineering World
"MECHANICAL KNOWLEDGE" is a leading community in the world who's releated to oil gas, Petrochemical and similer industry
Pumps are essential devices used to move fluids (liquids or gases) from one place to another. There are various types of pumps designed to suit different applications and fluid-handling requirements. Some common types of pumps include:
1. Centrifugal Pumps: These pumps use centrifugal force to impart energy to the fluid by rotating an impeller. They are widely used in industrial, municipal, and residential applications for water supply, circulation, and drainage.
2. Positive Displacement Pumps:
- Reciprocating Pumps: These pumps use a piston or diaphragm to displace the fluid, creating pressure and flow. Examples include piston pumps and diaphragm pumps.
- Rotary Pumps: These pumps use rotating mechanisms to trap and transfer fluid. Examples include gear pumps, vane pumps, screw pumps, and rotary lobe pumps.
3. Axial Flow Pumps: These pumps move fluid parallel to the shaft axis with the help of propeller-like blades. They are suitable for applications requiring high flow rates at low heads, such as irrigation and drainage systems.
4. Mixed Flow Pumps: These pumps combine features of centrifugal and axial flow pumps, suitable for medium heads and flows.
5. Jet Pumps: Also known as ejector pumps, these pumps use high-velocity jets of fluid to entrain and transport another fluid. They are commonly used for lifting water from wells and boreholes.
6. Submersible Pumps: Designed to be submerged in the fluid being pumped, these pumps are often used in applications such as groundwater extraction, sewage handling, and deep well pumping.
7. Metering Pumps: These pumps are designed for precise control of flow rates, commonly used in chemical dosing applications, water treatment, and process industries.
8. Air-operated Diaphragm Pumps (AOD Pumps): These pumps use compressed air to move a diaphragm, creating suction and discharge strokes to transfer fluid. They are often used in industrial and chemical applications.
For more handbook and pdf document download in free of cost kindly visit our website at - www.mechanical-knowledge.com
--
11 个月Very good
| Operations, Problem Solving
1 年So I cant understand why they don't have some filter boxes made, most likely 3d printed out of maybe some peek or, as far as that goes glass, filled nylon 66. HP CIP set up; if you could get it to a smaller amount of tss it would be better on all of your equipment. Also don't push it through your filters use suction.. just a thought.
would you like to know how to simulate such machines?
--
1 年Gracias por compartir la informacion