Tough Terrain & Steep Slopes crumble before the ATTILA SKD

The ATTILA SKD has wheels with an agrarian profile, and also a very low centre of gravity and optimised weight distribution (33% to the front, 67% to the rear), for easy driveability and stability on banking.

The differential lock with foot control is very practical in use, and will allow you to retain control while mowing on slopes, even if a drive wheel loses adherence. Profiled mowing deck, and reversible swing tip blades (85 cm cutting width). The system allows mowing in difficult conditions.

Thanks to the optional dual wheel kit, the ATTILA SKD passes where the others can't. This option enables you to climb very steep slopes under difficult conditions (wet grass, sand or mud) without creating more damage because of immense ruts. The dual wheels allow a better distribution of weight and optimal transmission of power.

Hand control for drive transmission, from 0 to 10 km/h: adapt your speed precisely to the terrain (slopes, obstacles etc.) or to the height of the grass for closely controlled mowing.

Silent, low vibration, thanks in particular to its soundproofed housing and silent block-mounted engine, ATTILA SKD sets the standards in the area of comfort and use. It cuts the noise levels of market standards by up to half. You will feel the difference, especially during prolonged use

A mower that can be adapted to your build. The seat has armrests and moves forward and back on a rail for adjustment, the seat suspension firmness is adjustable, as is the steering wheel tilt.

The steering system is responsive, smooth and requires no effort. The wheel has a knob for dynamic and enjoyable driving, especially on rougher terrain or with obstacles.

All the controls are accessible from the driver’s seat for maximum comfort and greater safety.

In addition to compliance with all the applicable standards and directives, ATTILA SKD goes even further in terms of safety:

The parking brake is controlled with a pedal and is very easy to apply and release.

The pedal position is designed to be extremely ergonomic.

Tank filling is clean and safe – a retention duct drains away extra fuel in the event of a spill.

Nothing needs to be removed to change the engine oil, thanks to a valve fitted on the engine. The valve is extended by a pipe that drains the oil away to the rear of the machine from where it can be collected easily. No removal for changing the oil and replacing the drive transmission filter, with easy access to the rear of the machine.

Reinforced hydrostatic transmission with Outils WOLF specifications that draw on automotive features: torque higher than market standards, smoother movement and longer life.

Cutting decks designed specially to withstand different mowing conditions for a long period: Mastershock (with steel reinforcements). Reversible blade flails. The system allows mowing in difficult conditions.

Change from the high grass mowing or brushcutting to mulching… You can fit the mulching cutting deck of Biocut SKM to ATIILA SKD. The change is quick and requires no tool. The wheels may also be replaced.