Tips on the maintenance of three commonly dental equipment

Dental equipment is the most important asset of a dentist. If it often fails, it will not only cause a lot of inconvenience to the work, but also greatly increase the cost of use. Understanding the maintenance knowledge of some dental equipment will not only greatly improve work efficiency, but also Greatly reduce the cost of use. Below I briefly introduce the maintenance of three commonly used dental equipment. In the future, I will make a more detailed introduction one by one.

1. Dental handpiece

Before opening a consultation every day, drip a drop of dental handpiece lubricant from the air inlet of the dental handpiece, and then turn the dental handpiece on the comprehensive treatment table to make the lubricant enter the movement. Open the back cover of the dental handpiece every month, take out the movement, and use it. Wash with water and alcohol, dry and add oil.

2. Comprehensive treatment table

Adjust the output air pressure of each of its heads. Excessive pressure will shorten the service life of the mobile phone. The air pressure required for high-speed mobile phones is 2.0-2.2 kg, and low-speed mobile phones 2.5-2.8. Clean the air and water filters once a month to avoid Air, dirt in the water clogs the pipeline.

3. Air pump

Ajust the output pressure of the air pump to 5-6 kg. If the pressure is too high, it is easy to rupture the trachea of the treatment table. Empty the water in the air tank once a week to prevent the water from occupying the space of the air tank and causing the air pump to start frequently. Check the oil viewing window every month, if the oil level is lower than the midline, add pump oil to avoid the lack of oil and cause the machine to crash.