TIMENET Pro is GPS based, so it can be used anywhere on the earth’s surface.
Most network installations require a reference time signal for synchronising system clocks to ensure they are always set precisely to the correct time. It is crucial that all CCTV recordings are accurately time-stamped, especially for evidential purposes.
Most Digital Video Recorder (DVR) products - especially those which are PC-based - have inaccurate internal clocks which can drift by many seconds per week. Considering that DVR and NVR systems should run unattended for months or years, the time settings can end up being in error by many minutes, or even hours.
Further, multiple recorders and devices will drift apart time-wise, reducing the veracity of evidential data.Whilst traditional solutions involve atomic clock radio receivers or GPS sensors linked to an expensive rack mounted master clock server, TIMENET Pro integrates the GPS receiver and NTP clock server into a compact device for direct connection to the network.
TIMENET Pro can be wall-mounted, uses very little power and is less than half the cost of competing solutions. TIMENET Pro can be powered over the network by POE, or locally by a low voltage power supply.
TIMENET Pro provides a clean and simple browser interface for setting up the IP address and configuration password. The status tab displays information such as system up-time, GPS lock, UTC and local time, plus an extremely useful satellite signal meter. This meter shows satellites in view, and their signal strength.
UK Security Cleared - International Sales Engineer at Rhombus
8 年Great product and easily installed and configured!
I've used a few timenets and all worked first time. Just make sure the antenna can see the sky and away you go. Be careful of metalised glass windows which will block the signal. Pop the antenna outside.