Thread stuck in Device driver error Windows 11/10 | Blue screen of Death 2024

The THREAD_STUCK_IN_DEVICE_DRIVER error typically points to issues related to device drivers, particularly graphics drivers. Here is how to fix this BSOD.

THREAD_STUCK_IN_DEVICE_DRIVER BSOD error (stop code 0x100000ea) mostly occurs when a device driver is stuck spinning in an infinite loop, while it waits for the hardware to enter the idle state. This is usually a driver problem and rarely hardware. So when you receive this BSOD error, please Make sure your computer device driver is updated. If the device driver is outdated or not working, your computer will receive Thread stuck in the device driver BSOD error. since it’s Mostly caused by faulty video card drivers or damaged graphics cards. Here are some applicable solutions you may apply to get rid of this.

THREAD_STUCK_IN_DEVICE_DRIVER Error

The most common cause of this error is an outdated or corrupted graphics driver that fails to communicate properly with the hardware. Again Problems with the graphics card, such as overheating, faulty hardware, or poor connections, can trigger this BSOD.

Overclocking your GPU or CPU can lead to instability, causing the driver to get stuck in a loop.

Certain software, especially those that heavily utilize the GPU (like video editing software or games), may conflict with the drivers, causing the error.

Sometimes, a recent Windows update may introduce compatibility issues with existing drivers, leading to this error.

Boot Windows into Safe Mode With Networking

Mostly This Error causes due to outdated or corrupted Display Driver so if your windows do not start normally after several Restarts Then it's time to boot your windows into safe mode. Safe mode is an inbuilt troubleshooting feature that disables unnecessary programs during the startup process. windows safe mode loads the operating system with a minimal set of system device drivers just enough to boot windows os and in safe mode the startup programs, add-ons etc do not run.

Update / Roll Back / Reinstall Display?Driver

Most of the time Outdated corrupted video card drivers can be the main cause for Thread stuck in the device driver Blue Screen Error, so make sure you have the latest driver for your video card. or sometimes After the update the display driver if it’s not compatible with Windows then this will cause the blue screen error. So for that, you have to Try all Three methods Update, Roll Back, Reinstall Display Driver and check Which option worked for you.

Steps to Update/Reinstall Graphics Drivers:

1. Press Win + X and select Device Manager.
2. Expand Display adapters.
3. Right-click your graphics card and choose Update driver.
4. Select Search automatically for updated driver software.
5. If updating doesn’t work, right-click the graphics card again and select Uninstall device.
6. Restart your computer, and Windows will attempt to reinstall the driver automatically.

Steps to Roll Back Graphics Drivers:

If the problem started after a recent driver update, rolling back to a previous version might resolve the issue.

• Go to Device Manager and expand Display adapters.
• Right-click your graphics card and select Properties.
• Go to the Driver tab and click Roll Back Driver.

Check for Windows?Updates

Windows updates often include fixes and improvements that can resolve compatibility issues with device drivers.

• Go to Settings > Windows Update.
• Click Check for updates.
• If updates are available, download and install them, then restart your computer.

Check for Hardware?Issues

Hardware issues, such as a failing graphics card or poor connections, can cause the driver to get stuck. Addressing these issues can prevent the BSOD.

• Ensure your graphics card is properly seated in its slot.
• Check for dust or debris in your system that might be causing overheating.
• If possible, test the graphics card in another system to rule out hardware failure.

Disable Overclocking

Overclocking can push hardware beyond its stable operating limits, leading to instability and errors like THREAD_STUCK_IN_DEVICE_DRIVER.

• Enter your BIOS/UEFI settings by pressing the appropriate key during startup (usually F2, F12, Delete, or Esc).
• Locate the overclocking settings and reset them to default or disable them entirely.
• Save and exit the BIOS/UEFI, then restart your computer.

Disable Fast?Startup

Fast Startup is a feature in Windows designed to speed up the boot process by saving some system information to a file upon shutdown. However, this feature can sometimes cause driver conflicts, leading to errors like the THREAD_STUCK_IN_DEVICE_DRIVER BSOD.

• Press Win + R, type control, and press Enter to open the Control Panel.
• Go to Hardware and Sound > Power Options > Choose what the power buttons do.
• Click Change settings that are currently unavailable.
• Scroll down to Shutdown settings and uncheck Turn on fast startup (recommended).
• Click Save Changes and restart your computer.

Repair System Files Using SFC and DISM?Commands

If you notice this Thread stuck in the device driver BSOD error started after recent Windows 10 upgrade there might be chance corrupted, or missing system files may causing the issue. We recommend running the SFC utility, a useful utility to check and restore missing, corrupted system files on Windows PC.

SFC and DISM can detect and repair corrupted system files that may be causing the driver or system to malfunction, reducing the likelihood of encountering BSOD errors.

Again open the command prompt as administrator type sfc /scannow and hit the enter key. This will start scanning process for missing, corrupted system files, if found any the SFC utility will restore them from a special folder located on %WinDir%\System32\dllcache.

Wait until 100% complete the scanning process, then restart Windows. If Sfc scan results Windows Resource Protection found corrupt files but was unable to fix some of them. that cause on same command prompt window Run the DISM command: DISM /Online /Cleanup-Image /RestoreHealth. Wait until 100% complete the command after that again run sfc /scannow command.

Perform a System?Restore

If the issue started recently and you’re unsure of the cause, performing a System Restore can revert your system to a previous state before the error occurred.

• Press Win + R, type rstrui.exe, and press Enter.
• Choose a restore point from before the issue started.
• Follow the on-screen instructions to complete the restore process.

Source: https://windows101tricks.com/thread-stuck-device-driver-windows-10/