Technical scheme of Z-type bucket elevator
The specific technical scheme of the Z-type bucket elevator is: a rotary bucket-type multi-point blanking Z-type elevator, including a main body, a transmission chain, a sprocket, a hopper and a driving device. The main body is a Z-shaped conveying pipe, and its lower end is provided with There is a feeding port, the upper end is provided with no less than one discharging port, and the side walls on both sides of the inner cavity of the main body are provided with driving components that drive the hopper to lift from the feeding port to the discharging port, and the driving components are correspondingly assembled on the sprocket. The two sets of drive components are correspondingly arranged on the inner wall of the main body; a number of hoppers are correspondingly distributed between the transmission chains of the two sets of drive components, and the upper edges of the two ends of the hopper are correspondingly hinged on the inner side of the drive chain through hinge shafts, and the discharge port There are discharge plates corresponding to both ends of the hopper. The discharge plates extend upward into the inner cavity of the main body to block the lower edge of the hopper. The middle of the discharge plate protrudes upward to form a shuttle-like structure; the sprocket corresponding to the lower end of the main body is The driven wheel, the sprocket corresponding to the upper end of the main body is the driving wheel, the driving wheel is correspondingly connected to the driving motor through belt transmission or chain transmission, and the outer wall of the main body is provided with a tensioning mechanism corresponding to the driven wheel.
The driven wheel is assembled on the main body through the rotating shaft, and the outer wall of the main body is provided with a bar-shaped hole corresponding to the horizontal extension of the rotating shaft; the tensioning mechanism includes a slider corresponding to the assembly shaft extending out of the main body, and a stud extending along the bar-shaped hole. Connected to the slider, the side wall of the main body is provided with an ear plate corresponding to the stud, and the stud passes through the ear plate and is correspondingly fitted with a nut.
领英推荐
The corner of the main body of the Z-type bucket elevator is provided with a guide wheel corresponding to the transmission chain; the inner wall of the discharge port is fixedly connected with a cylinder corresponding to drive the discharge plate to extend upward into the inner cavity of the main body or retract the discharge port. A material guide mechanism is arranged below the discharge port. The material guide mechanism includes a number of conical guide nozzles. The conical guide nozzles are sleeved downward in sequence. A compression spring is arranged between two adjacent conical guide nozzles. There are no less than one group of traction ropes on both sides, the upper edge of the tapered guide nozzle is provided with a collar corresponding to the traction rope, and the upper edge of the lower conical guide nozzle corresponds to a fixed traction rope; the outer wall of the discharge port is provided with a corresponding traction rope The fixed pulley of the rope, the traction rope goes up around the fixed pulley and folds back down.
https://www.dahanmachine.com/product-center/Z-Type-Bucket-Elevator.html
Screening conveying machinery Co., Ltd - designer
2 年https://www.dahanmachine.com/product-center/Z-Type-Bucket-Elevator.html