Sx Series Software Release V14.03 | SxA | SxD | SxE

A AMPEREL informa que saiu uma nova vers?o do software para os analisadores portáteis Phabrix SxA | SxD | SxE

Mais informa??o entrar em contacto connosco.”

Telf.: +351 217112090

Email: [email protected]

V14.03 includes important system improvements

The truly-portable Sx test & measurement range offers advanced capabilities including hybrid IP/SDI performance and physical layer testing, along with proven rugged design and exceptional ease of use.

?

V14.03 Introduces the following system improvements to the SxA, SxD and SxE

• Improved battery power management and monitoring.?
• Improved battery lifespan for existing units.

?

This release is supported on the following Sx Units: SxA, SxD & SxE.

?

How to update your Sx Handheld Unit via LAN:?

Watch the Video Guide here, alternatively follow the instructions below -

1. To download the latest software version, make sure that the network settings are correct and that the Sx instrument is connected to the internet via the Ethernet connection. Pressing the Download button will cause the current release of software to be downloaded from the Phabrix Web Site. This will take a short time dependent on the connection to the Internet.?

2. Once the download has completed, the software will be checked for errors before being stored on the Sx instrument for future installation. If the latest software is already present on the Sx instrument, no software will be downloaded and a message will be shown.?

Note that the unit should be connected to the AC adaptor so that the battery state does not affect the installation process. Note that multiple releases of software may be stored on the Sx instrument so a previous release can be re-installed if required.?

3. To install the downloaded software on the Sx instrument, select the release using the field with releases listed. The largest number is the latest release. Select the ‘Install’ button and a confirmation dialogue will be shown. Press “Yes” and the installation will start. This process takes several minutes to decompress the software, extract the files and then reprogram the hardware. If an error is given during the installation, retry the installation and or download. Do NOT turn the Sx instrument off until an installation has completed correctly.?

4. Once the installation has competed, if “Reboot after Install” is checked the Sx instrument will re-start with the new software installed. If not checked then the instrument should be turned off and on again manually.?

Note that as part of the installation procedure, all memories are archived to a backup file and then deleted. They can be restored from the System-Memories page using the Restore button and selecting the ‘_Before_Upgrade’ archive.

?

?

?

?