Surface Mount Technology (SMT) is mainly composed of the following components:
jimmy Zhang
2-6 layers PCB free sample service, PCB assembly, one-stop PCBA service, 2-30 layer PCB manufacturing and electronic components procurement service! [email protected], +8618123677761
Surface mount technology (SMT) R composition"
Surface Mount Technology (SMT) is mainly composed of the following components:
E-Mail:[email protected]?
Supply MCU, IC, equipment accessories,?More than 8 million SKUs
https://www.bestpcbamanufacturer.com/??SMT, DIP, PCB assembly,?PCB manufacturing, one-stop PCBA solution!?
Office Address: Room 509-601, Tianyue Building, Shajing Center Road, Baoan District, Shenzhen，518125
Factory Address: 4th Floor, Building B, Dayou Industry and Trade, Fuyong, Baoan District, Shenzhen，513108
Surface Mount Devices (SMD): These components are designed for SMT and are small, lightweight, and high-density.
Common SMDs include resistors, capacitors, transistors, integrated circuits, etc.
Printed Circuit Board (PCB): PCB is the carrier of SMT, with wire paths and connectors on it for connecting various components. PCB can be made by processes such as printing, etching and mounting.
Mounting equipment: SMT mounting equipment mainly includes placement machines and reflow soldering machines. The placement machine is used to automatically paste the SMD on the PCB accurately, and the reflow soldering machine is used to solder the pasted components to the PCB.
Soldering material: The soldering material used by SMT is lead-free solder paste, which has low melting point, good feasibility and environmental protection. Process control: The success of SMT depends on good process control, including the adjustment of various parameters and precise placement process control to ensure the correct position of components and good soldering quality. I hope this answer has answered your question, and if you have any other questions, please feel free to ask.
领英推荐
SMT inspection is the inspection of electronic components and products used in the SMT assembly process.
SMT testing includes the following aspects:
Negative Film Inspection: Mainly inspect the quality and integrity of the negative film to ensure that there is no damage or defect during the assembly process.
2. Exposure detection: Detect the leakage on the circuit board to avoid failure caused by short circuit.
3. Welding quality inspection: Detect the welding quality of welding points to ensure good welding, no cold welding, no false welding and other problems.
4. Component identification detection: Detect whether the identification, model and position of electronic components are correct, so as to ensure that the correct components are installed in the correct position.
Product function test: perform functional performance test on the assembled product to determine whether the product meets the specifications and requirements.
SMT inspection can be done by using various equipment and techniques, such as X-ray inspection, optical inspection, infrared inspection, electron microscope, etc.
Please note that specific SMT inspection processes and methods may vary between different manufacturers and products.