Spindle repair

With more than 15 years experience Serving the PCB Drilling and Routing Industry ,We can repair most types spindles used in PCB Industry specializing in high speed air bearing spindle, such as West wind spindles, Posalux, Excellon etc...and we can also repair the CNC spindles, Servo motor, PCB card .

Upon receipt, all spindles are ready to dis-assembly and testing we will analysis what is the problem of the spindle and estimate the repair price send to customer for confirm.

Electrical checks are performed prior to dis assembly, these checks are Performed again after assemble. Spindles are completely disassembled.at the same time,we assess the problem with your spindle and notify you of any concerns to machine.process or facilities that may cause of the failure.and check which parts need to been replace and which parts need to refresh.We use Ultrasonic cleaning machine to clean the parts of the spindle ,especially clean the bearings to insure the spindle is as clean as it can possibly be.If some parts can't use anymore ,we will replace the parts for you,

all the parts meet the OEM specifications Our Skilled technicians with more than 20 years work experience in schmoll drilling machine maintenance, insure proper assembly Balance is critical for operating accuracy precision and life of any spindle.

All armatures are dynamically balanced on balancing equipment to ensure proper operation at all speeds.All spindles are put through a rigorous test protocol prior to acceptance by our QA department.This includes vibration, noise, run-out, both static and dynamic,throughout the spindles operational range.

We also put the spindle through an extended reliability test phase to insure it will operate properly when received by the customer