The solutions for uv printer flying ink and cross color

First: flying ink caused by static electricity, you need to add an electrostatic bar or add a ground wire, shield it

Second: the nozzle voltage is too high, you need to modify the circuit board, or change the circuit to avoid this problem

Third: Print the test strip to check the condition of the nozzle. If it is found to be blocked or faint, it is necessary to clean the passage of the nozzle to keep it open. The solution to the disconnection of the nozzle needs to check the condition of the nozzle frequently to see if there is any illusion or blockage. If it needs to be processed immediately, the flying phenomenon cannot be avoided.

Fourth: the problem of electronic control system, this requires special technical personnel to carry out maintenance to solve

Fifth: the distance between the nozzle and the carrier is too high or easy to solve, as long as they shorten their distance.

 The uv printer has some shortcomings, but it does not affect his popularity, because its biggest advantage over traditional printers is that the printing material is not subject to any restrictions, enabling direct printing, one-time imaging, and its printing effect far exceeds the traditional Printing effect, can also achieve the embossed personality customization effect, eliminating the need for past repetitive processes such as plate making, filming, color registration, etc. Nowadays, the products are more and more complicated, but no matter how complicated, uv flatbed printer can realize once