Solutions to die casting molds problem

Aluminum die-casting mold usually occurs some very common problems during processing. Because each type of problem is caused by a different reason, we should deal with these problems based on actual status.

The following are a number of common solutions to deal with die casting mold process problems:

1, clean the parting surface, clean the cavity, clean the top lever; change the coating material, improve the spraying technology; strengthen the clamping capacity, strengthen the weight of cast metal. This is some of the methods that can be implemented by simple operations.

2, adjust the processing parameters, injection capacity, the speed of injection, filling time, mold open time, pouring temperature, mold temperature.

3,select high quality of aluminum alloy ingot material, improve the proportion of new element and furnace, to improve the smelting processing skills.

4, trim and change aluminum die-casting mold, modify and change the pouring system, strengthen the internal pouring gate, increase the set overflow slot, exhaust gas tank, etc.