This tutorial will show you how to configure your SMS Controller using SMS Workbench
The QTech 4G SMS Controller uses SMS/text messages and provides multiple people with alarms, status conditions and the ability to control devices (and receive a confirmation SMS) – all from your smart phone.
Supports 4G bands B1 (2100MHz), B3 (1800MHz), B5 (850MHz), B8 (900MHz), B28 (700MHz)
- Class leading intuitive user interface software
- SMS Controller to SMS Controller texting. Multiple controllers can text each other allowing you to build a network
- Text the SMS Controller “status” to receive the current I/O status
- Count flow pulses and provide a daily total to your phone
- Multiple I/O: Digital inputs x8, Analog Inputs x2, Digital outputs x8, Analog outputs x2
- Up to 10 people can be added to the address book
- Up to 4 actions can be taken per I/O point
- USB programming
- Forgotten the message format? Simply text the SMS Controller for a list of available commands
- Pulse output for digitals – text “Pulse” for a 1 second output, perfect for overload/reset applications
- Common text alarm examples are listed here
The 4G SMS Controller requires a DC power supply, antenna and SIM card.
Please select the most suitable option for your application from our range of?Antennas?&?Accessories.
This innovative and cost effective control module enables numerous remote control applications.
- Switch a pump, irrigator or generator on & off simply by sending a SMS message – Receive confirmation by SMS
- Receive a SMS every time a gate opens
- Automatically switch on a device when an activity occurs, e.g. security camera/lighting.
- Send texts between SMS controllers allowing wider scale usage & additional flexibility
- Receive an automated SMS from a well or river level every hour/day/month or at a specific time e.g. 7am
- Count flow meter pulses & send the daily total via SMS
- Receive an alarm if the analogue drops below, above, or between values, with units e.g. Litre or Amps
- Text the controller to receive all of the allowable commands or text “Status” for a complete I/O status
These examples are just some of the many ways the SMS Controller can be used.
CONTACT US TODAY TO DISCUSS YOUR REQUIREMENTS. [email protected]
