Six tips to crack LED display loading failure problem

When using outdoor led display, it often fails to load. Free to send you outdoor LED display solutions. At the same time, you can analyze the reasons why the led display cannot be loaded from the following 6 aspects.

1. Check whether the jumper cap is loose or falls off; If the jumper cap is not loose, ensure that the jumper cap is oriented correctly.

2. Check that the serial cable used to connect the controller is a through cable rather than a cross cable.

3. Check that the serial cable is intact and both ends are not loose or falling off.

4, control led display control software and their choice of control card to choose the correct product model, the correct transmission mode, the correct serial number, the correct serial transmission rate and control software provided in the dip switch diagram correctly set the control system hardware on the address bits and serial transmission rate.

5. Ensure that the hardware of the control system is correctly powered on.

6. If it still fails to load after the above check and correction, please use a multimeter to measure whether the serial port of the connected computer or control system hardware is damaged. To confirm whether the computer should be returned to the manufacturer or to the control system hardware for testing.

In short, the outdoor led display loading is not normal, may be the product itself, may also be caused by your improper operation in the process of use. It is easy to find the root of the problem if you think carefully or ask the manufacturer.

Thank you for watching. I hope we can solve your problems. Sostron is a professional LED display manufacturer. We provide all kinds of displays, display leasing and display solutions around the world. If you want to know:Prolong LED display life tips. Please click read.