SilverSeal waterproofing membrane

BPA-SilverSeal is a “lightweight” waterproofing system for the use in any water-sealing applications. BPA-SilverSeal is a needle punched non-woven fleece impregnated with water absorbing and water swelling polymer (SAP and LDP) combined with a high-density PE-membrane. BPA-SilverSeal is a well-tested double-sealing system.

The unique sealing properties of BPA-SilverSeal are attained through two functions; the first sealing function lies in the high-density PE-membrane, the second sealing function is only activated if the membrane is damaged and the incoming water activates the swelling non-woven geotextile. If water penetrates the membrane, the water reactive polymer swells thus creating an extremely tight, gel-like film which permanently seals the concrete structure.

BPA-SilverSeal can be used as pre- and post-applied waterproofing membrane with unique self-healing properties.

SilverSeal is very simple in handling during installation process (self-sealing fleece with PE-film) on site. Take a look how fast, easy and economical the installation of BPA-SilverSeal is:

SilverSeal is well tested and approved. Silverseal is tested up to 6.9 bar waterpressure and can be used either pre-applied as a fresh concrete bonding membrane or post-applied as a active / self-sealing waterproofing membrane.

Several test reports shows you the outstanding performance of SilverSeal also in the field of tunneling and tunnel sealing.

For further information on SilverSeal you can take a look on the video below. Beside that you are free to ask for any assistance you may need. www.bpa-waterproofing.com