Silicone Fluid used in Spinneret Cleaning

The Silicone Cleaning Spinneret Spray is a propriety aerosol product primarily consisting of High Viscosity Silicone Oil.

This particular Silicone oil has the main characteristic of being thermally stable and resistant to oxidation and charring at high temperatures (above 300C).

The Silicone Oil forms a thin film on the spinneret surface and maintains its effect for a long duration due to its heat stability and low volatility.

The heat-stable silicone oil use in conjunction with nontoxic and non-flammable solvents to impart mobility to the viscous silicone fluid. The multi-effect of the combination of solvents is the dispersion of silicon oil molecules to form a thin uniform film on the spinnerets surface. And enhance the spreadability of the silicone oil while applying and cleaning the spinneret surface.

Another important role of the solvents used in our spray?is to clean the surface and fine holes of the spinnerets by penetrating inside and removing the greasy film of oligomers and burnt polymers. The solvents, being highly volatile liquids. And it gets evaporated leaving a thin uniform film of silicone oil inside the holes and surface of spinnerets only.

ROLE OF VISCOSITY IN SILICONE OIL

While there is no important and initial role of the viscosity of silicone fluids in the performance while being used on spinneret, the viscosity-temperature coefficient is a very important parameter and determines the quality of silicone oil and performance at temperatures in excess of 300‘C.

JIEHONG SILICONE OIL PROPERTY

JIEHONG silicone oil is heat-stable which could maintain the liquid state of oil, even at high temperatures in excess of 300‘C for up to 96 hours.

For Technical Data Sheet, please contact me:

Sherry Yu: [email protected]

whatsapp: +86 13971194951