Side Stream Filter

Side Stream Filter

Benefits Of Side Stream Filters

Product Benefits

Custom designed

  • Complete filtration solutions

Modular and flexible

  • Wide range of vessels and sizes

High corrosion resistance

  • Vessels are phosphate pre-treated, polyester coated steel

High efficiency

  • Perfect water distribution during filtering and backwashing

Efficient backwash

  • Manual or automatic backwash

Various bed types

  • Sand, gravel, activated carbon, anthracite, basalt, etc.
  • Benefits of Side Stream Filtration in Cooling TowersVasudev water solution has over 16 years of experience in filtration and water treatment in the industrial sectorsUsing side stream filters for cooling water is multi-path filtration, so the water is filtered multiple times, allowing for fine particle sizes to be removed and provides effective filtration even with 20-100 micronSide stream filtration is an effective tool for the control of deposition and fouling in a cooling water system. Determining the proper type for your system includes examining various factors and filter media types.
  • A properly designed side stream filter can benefit your system through:

  • Reduced corrosion rates
  • Increased equipment life
  • Better system efficiency
  • Reduced maintenance costs
  • Increased chemical efficiency
  • Decreased chemical biocide use
  • With heavy solids loading, significant cooling tower improvement might be realized with the use of a side stream filter.

When to Consider Side Stream Filters

The installation of a side stream filter is a capital expense that generally requires return on investment (ROI) consideration for plants to approve. Consider the following as indications that a plant should evaluate prior to the installation of a filter.

  • The primary make-up is from an unclarified water source (river, sewage treatment, etc.) that is high in suspended solids and/or iron.
  • The system is having a difficult biological problem even though a good biocide program is in effect.
  • Heat exchangers are showing fouling even though a good anti-foulant program is being used.
  • Excessive corrosion rates can be traced to fouling.
  • Loss of heat transfer is attributed to deposition rather than corrosion.
  • High levels of solids are building up in the sump.
  • Heat exchangers require frequent mechanical cleanings.

Benefits of Using Side Stream Filters

Several benefits can result from the use of a side stream filter. Obviously, not all of those listed below apply to all systems, and good judgment must be applied before making any claims. However, bearing that in mind, the following benefits can be realized.

  • Since solids are removed from the system, the corrosion inhibitor will protect clean rather than dirty surfaces, thereby reducing corrosion rates and increasing equipment life.
  • When used with good chemical treatment, the filter will keep the system much cleaner and, as a result, the need for mechanical cleaning of exchangers and sumps is reduced, leading to lower maintenance costs.
  • A cleaner system means better heat-transfer rates for longer periods of time, leading to lower operational costs.
  • In some cases, the removal of suspended solids from the circulating water allows higher cycles, leading to lower membrane exchange and maintenance costs.
  • Large biological growths and dead organisms are removed with a side stream filter. This reduces biocide demand and makes non-oxidizing biocides more effective.
  • Size of the media is important, since it must:

  • Prevent suspended solids from passing through the media.
  • Hold solids for easy removal during backwashing.
  • Be capable of holding a given quantity of solids without clogging.

Medium size is defined by two figures:

  • Effective Size: Particle size above which 90 percent of the medium is larger.
  • Uniformity Co-efficient: Effective size divided into the particle size above which 90 percent of the medium is larger.

In most cases, because of their high sediment removal ability, sand or anthracite is the filter medium used, and sometimes the two will be used together (i.e., mixed media). The filter beds contain different size layers of the media. Fine sand or anthracite will be on top, with larger and coarser grades underneath. These will be supported on graded gravel or heavy anthracite.

Most filters operate at a filtration rate of 2 to 3 gallons per minute per square foot of filter surface. Backwash rate is enough to expand the filter bed by 50 percent, usually 10 to 20 gallons per minute per square foot.

Filter media will usually be selected to:

  • Remove those particles with the greatest tendency to settle.
  • Be least expensive for a given water throughput.
  • Require a minimal backwash rate.

Filter Design

It is strongly recommended that a particle analysis be done on the representative stream that is to be treated. This can be reviewed while planning your side stream treatment. For most side stream filtration, a centrifugal style filter is optimal. It will remove the major problems your system faces and require very little maintenance or repair. However, each filter product does have its limitations.

Media filters provide depth filtration technology by filtering water through a thick layer of graded granular particles. Suspended solids are trapped and attach to the filtration media. Available in a wide range of media types – sand, crushed glass, active carbon, anthracite, basalt, etc. The filter vessels are available in various tank construction materials, meeting international drinking water standards.

  • For removal of low density particles (≥1)
  • Filtration degree: down to 1 micron (depending on filter-bed type and raw water quality)


P.V. Parmar

Company Owner at P.V. PARMAR & SONS since1990 30 + years experience in mechanical engineering work

1 年

I am Minesh Prakashbhai Parmar From - P.V. PARMAR & SONS Our work details - Plate Bending machine/Hydraulic Press/Working foreman/Press Break & Shearing machine/Rolling Machine, more than 32 years of experience includes profile bending machine (section bending) {Pipe rolling, I-Beam Bending, Angle Bending, Channel bending, Cone bending} Dishend making for pressure vessels, Press Brake & Shearing machine for Sheet metal Bending & Cutting process, We also make tapper boom for crane which is used in ships with single piece upto 10 meter, Shaper machine for slotting, Drill machine, Power Press for punching process, Lathe machine for turning or threading . Machine or company view - WhatsApp -https://wa.link/jez0gn Facebook - https://bit.ly/3CfgxaJ Instagram - https://bit.ly/3jqstOp LinkedIn - https://bit.ly/3xp9Lvs Company - P.V Parmar & Sons GST no. - 24ACTPP5292Q1ZI Contact - +91 6352293804 Address- Plot - 01 Sector - 10 / A ,GIDC Near - ITI school Gandhidham Kutch Gujarat ( 370201 ) E-mail - [email protected]

要查看或添加评论,请登录

Hitesh Patel的更多文章

  • Side stream filtration cooling tower

    Side stream filtration cooling tower

    What is side stream filter for cooling tower? Side stream filtration is used to filter a portion of the systems…

社区洞察

其他会员也浏览了