shijianzhuang liantu Self Amalgamating Silicone Rubber Tape LT0525
Product Description:
Silicone rubber self-adhesive tape, made of high temperature resistant, superimposable adhesive tape adhesive inorganic silicone rubber. It has good ductility and self-fusion, H-level insulation protection, can work for a long time at -60℃-240℃, and emergency overload temperature Up to 300°C.
Application:
Wide range of uses, large dosage, superior performance, anti-fouling, anti-hydrochloric acid, anti-ultraviolet, waterproof; oxygen resistance, ozone resistance, cold resistance, heat resistance, high pressure resistance and other characteristics.
In the home pipeline emergency waterproof repair performance is outstanding, it can be used on the seabed to a depth of more than 330 meters (1000 feet). It can quickly self-adhesive in a few seconds. It is an ideal tape for marine equipment in any marine environment. Suitable for quick repair of ships, etc.
Instructions :
11. Before use, the interfaces that need to be repaired or sealed should be cleaned as much as possible to avoid excessive impurities. If it is not cleaned up, it will more or less have a slight impact.
2. The product is easily scratched on the shiny surface, so it needs to be wrapped with the next layer of film during the production process to protect the self-adhesive tape, so use the product to tear the film first.
3. Similar to the repair of other rubber products, the tape can be gently stretched by 200%-300% from the interface to be repaired layer by layer in a half-lap style until it is sealed and covered.
4. The product cannot be used directly after being wound. It needs to wait for a period of time and after the product self-fusion, the two ends of the product are bonded with the product
Product benefit:
Higher tensile strength
Strong electrical insulation
Good self-adhesive performance
Create a permanently airtight and watertight sealed environment in a few seconds
Glossy tape is self-adhesive instantly, leaving no adhesive residue, clean and beautiful
Extremely versatile!
Anti-acid, anti-corrosion, anti-oil, anti-sea water, anti-ultraviolet
Storage condition:
1. Pack well, prevent dust and oxidation
2. Keep ventilated and dry to prevent mildew
3. The storage time does not exceed 2 years
Precautions for using silicone rubber self-adhesive tape:
1. Since the product can be fused with its own materials but not with other materials, the start and end ends of the two-port silicone self-adhesive tape are wrapped.
2. After 24 hours of product integration, if there is no port, a sealed and insulated protective layer (integration) will be formed. It cannot be torn off after winding, and the self-adhesive tape needs to be cut with a knife.
3. When used in harsh environments, it is recommended to pack several layers, such as corrosive environments, high temperature resistance above 150°, humidity, water and other environments.