Shallow Twin TBM Bore Tunnel Study

Shallow Twin TBM Bore Tunnel Study

Andrew Cushing, P.Eng., M.Eng. Andrew Cushing, P.Eng., M.Eng.

Andrew Cushing, P.Eng., M.Eng.

Associate Geotechnical and Tunnelling Engineer at Arup

发布日期: 2021年5月5日
+ 关注
No alt text provided for this image

To study the settlement and structural effects of two closely spaced, 6m diameter, shallow TBM bored tunnels in soil, a 2D Finite Element Analysis (FEA) was performed using the commercial software PLAXIS. Numerical results yielded ground surface settlement profiles in addition to tunnel lining normal load and bending moment under a variety of contraction and stress relaxation values. These results were compared to those generated by closed form solutions. The resulting structural forces were compared to the capacity of a 300mm thick Steel Fibre Reinforced Concrete (SFRC) segmental precast tunnel lining.

Jasper Van Der Bruggen

3 年

Thank you for sharing Andrew! Keep the good work and those posts going! For anyone who has questions about PLAXIS, please send me a message or look at www.virtuosity.com/product/plaxis-2d/

赞
回复
Carlos Rojas, BEng. Civil eng, MSc. Civil eng. EUR ING

Tunnel engineer | conventional and mechanized tunneling | freelance

3 年

Hi Andrew, can you provide more details such geotechnical parameters, if the excavation is under a water table, and found Smax values?

赞
回复
查看更多评论

要查看或添加评论，请登录

Andrew Cushing, P.Eng., M.Eng.的更多文章

社区洞察

其他会员也浏览了