Several methods to identify acrylic sheets.

Thickness identification method: Generally, a good acrylic board is the thickness of the foot. On the contrary, if the thickness is not enough, the material is good and inferior; poor acrylic boards are relatively brittle and will fade and lose their originality soon after being exposed to wind and sun. Some luster;

?

There are many other simple methods, and I hope you can use your fire-eye Venus to choose your own materials and use the fire identification method: good acrylic materials are non-flammable, and many other materials on the market are pretending to be acrylic Material;

Rubber edge identification method: Generally speaking, good acrylic plate wholesale manufacturers ship acrylic with rubber edges. Some are acrylic boards, but many are made from recycled acrylic scrap, which are called joint venture boards;

?

Light transmission identification method: The light of a good acrylic plate is very pure white, not yellow or blue. Of course, the light must be white, and the light transmittance is also different.

?

Features of acrylic sheets from acrylic sheet wholesale manufacturers: high mechanical properties and dielectric properties, good heat resistance and moisture resistance, good machinability; long service life, more than 3 years longer than other material products; impact resistance Strong resistance, 16 times that of ordinary glass, suitable for installation in special occasions in safe areas; light weight, half lighter than ordinary glass, the load borne by buildings and supports is small, easy to maintain, easy to clean, rainwater can naturally For cleaning, you can also scrub with soap and soft cloth; the recovery rate is high, which is recognized by people's increasing environmental awareness.