Several appearances of stone surface collapse
1. Tiny gaps
This phenomenon is manifested as very fine small gaps on the surface of the stone. Under normal circumstances, it is not obvious with the eyes and seems to be no problem. But the hand feels very shaved when touched with the hand, and it is sharp. After the two boards are put together and installed, it can be seen that saw cutter the surface of the product has collapsed. However, in this case, the chipping can be eliminated by deburring.
2. Jagged edges
This phenomenon is manifested in that the four edges on the surface of the product are in a sawtooth shape, and the edges are sharp, which has a cutting granite great impact on the appearance of the product. Deburring cannot eliminate the chipping stone cutting machine phenomenon of jagged edges.
3. Edge collapse, missing edge
This phenomenon is manifested by the lack of a piece on the surface of the product, which is more serious in the collapse. The only way to deal with the collapse and missing edges is through the method of glue repair. Customers who are strict with the product will refuse to accept the glued product. The edges and hand cutting machine corners of granite and sandstone are not repaired firmly and easily fall off.
4. Drop corner
This phenomenon is manifested by the loss of one or several corners at the four corners of the product surface, which is more serious in the collapse and can only be handled by the method of glue repair. When the missing corner is large, it must be repaired with the stone of the same texture and color, otherwise, the product can only be scrapped and redone. Customers who are strict with the product will refuse to accept the glued product. The edges and corners of granite and sandstone are not repaired firmly and easily fall off.
5. Edge cracking
This phenomenon is manifested in the marble polishing machine appearance of crack lines on the surface of the stone product. If the stone product is not repaired in time, the stone product will collapse from the crack line and fall off the stone, which bridge saw will affect the appearance of the stone polishing machine surface.
