Selection Guide for Double Screw Conveyor

1. The screw shaft of the double screw conveyor turns in different directions. When the material is put into the feeding port, it will automatically rotate the material to the middle and mix it together.

2. The difference from the single-shaft screw conveyor is that with several more screw shafts, the conveying capacity is more than doubled, which saves time and increases production.

3. Number of screw shafts: According to the different conveying volume, the number of screw shafts can be appropriately increased, but generally it is an even number, and it can be increased to 6 at most. The shorter the time, the shorter the time from the feed port to the discharge port, and the weaker the degree of mixing and stirring. The degree of stirring is stronger.

4. Motor power: It depends on the length and the degree of several screw shafts. The longer the length, the more the number of screw shafts. The less, the power of the motor used is correspondingly smaller. According to the length of the factory, if the length of the factory is limited, the screw shaft with more and shorter length can be appropriately selected. If the factory is long enough and the width is not enough, the screw shaft should be less and the length should be longer, so that the conveying volume will not be affected too much.

https://www.dahanmachine.com/product-center/Double-Screw-Conveyor.html