Selected latest publications (April-June 2024) on gear manufacturing and related subjects

Gear Hobbing & Milling

Prediction and optimization of hobbing parameters for minimizing energy consumption and gear geometric deviations DOI:10.1177/16878132241236374 (Open Access)

Research and Application of Gear Hobbing Cutter Edge Passivation Technology DOI:10.16576/j.ISSN.1007-4414.2024.01.034 (Open Access)

Technological Possibilities of a Special Strategy for Processing Cycloidal Screw Surfaces with a Nonprofiled Tool DOI:10.1134/S1052618824020067

CNN and ANN Based Tool Condition Monitoring in Gear Machining Using Audio and Vibration Signals Via Cost Effective Sensors DOI:10.1109/ESCI59607.2024.10497391

Graphical Determination of Cut-Layer Dimensions in Machining by a Modular Hob DOI:10.3103/S1068798X24020278

A two-stage feature selection method for hob state recognition DOI:10.1016/j.engappai.2024.108580

Data-driven Discrete Simulation-based Dynamic Modeling and Continuous Optimization for Comprehensive Carbon Efficiency of Batch Hobbing DOI:10.1007/s40684-024-00625-9

Mathematical modelling and cutter design for generating chamfering of transversal profile for cylindrical gears DOI:10.1007/s00170-024-13822-2

Analysis of temperature change mechanism and temperature rise characteristics of dry hobbing machine tool under heterogeneous energy conversion https://doi.org/10.21203/rs.3.rs-4383217/v1 (Open Access)

A method to manufacture spiral bevel gears by equivalent completing DOI:10.1051/meca/2024013 (Open Access)

Anomaly Detection in Hobbing Tool Images: Using An Unsupervised Deep Learning Approach in Manufacturing Industry DOI:10.1016/j.procs.2024.02.058 (Open Access)

Chatter and Surface Waviness Analysis in Oerlikon Face Hobbing of Spiral Bevel Gears DOI:10.3390/aerospace11070535 (Open Access)

Experimental Investigation on Surface Characteristics of Finish Hobbed Gear using Grey Relational Analysis DOI:10.52783/cana.v31.799 (Open Access)

Gear Grinding

A form-grinding wheel optimization method for helical gears based on a PSO-SVM model DOI:10.1016/j.precisioneng.2024.04.007

Modeling of micro-tooth topography in face gear grinding considering dynamic features of geometric-kinematic DOI:10.1016/j.jmapro.2024.03.110

Higher-order parametrized correction based contact performance forecasting model for spiral bevel gears DOI:10.1016/j.ymssp.2024.111434

The Grinding and Correction of Face Gears Based on an Internal Gear Grinding Machine DOI:10.21203/rs.3.rs-4134523/v1 (Open Access)

A two-stage flank correction method for the continuous generation of face gears DOI:10.1016/j.jmapro.2024.04.056

Numerical and experimental investigation on temperature field during small-module gear creep feed deep profile grinding DOI:10.1007/s00170-024-13655-z

The Issues of Improving Surface Quality and Productivity in the Grinding with Copy Method of Shaped and Tooth Surfaces DOI:10.5772/intechopen.1004849 (Open Access)

Design of a Twisted Modification Module for Gear Grinding by Generative Method Based on SINUMERIK ONE DOI:10.3969/j.issn.1001-3881.2024.08.013

Research on the calculation method of grinding temperature field of spiral bevel gear based on generative machining DOI:10.1088/1742-6596/2761/1/012009 (Open Access)

Study on Online Monitoring of Grinding Status of Grinding Wheel Based on Force Signals DOI:10.13374/j.issn2095-9389.2024.03.09.003 (Open Access)

An identification method for a large-scale helical gear grinding process based on analysis of geometric errors DOI:10.1016/j.jmapro.2024.04.082

Analysis Of Modern Methods For Optimizing Technological Processes In Machine-Building Production Using Artificial Intelligence DOI:10.36910/automash.v1i22.1342 (Open Access)

A New? Computational Envelope Solution for? Helical Gear Disc Tool Profiling DOI:10.48084/etasr.7814 (Open Access)

Crowning dressing wheel based closed-loop topology modification approach for internal-meshing power gear honing DOI:10.1007/s00170-024-13964-3

Research on the surface modification and microstructure evolution during gear profile grinding based on cellular automaton DOI:10.1016/j.mtcomm.2024.109546

Effect of alloy-specific case-hardening layers on the grindability of gears DOI:10.1016/j.cirp.2024.04.030 (Open Access)

Enhancing the productivity of gear tooth grinding https://urn.fi/URN:NBN:fi-fe2024061351747

On the grinding temperature field of helical gears: Modeling and experiments DOI:10.1016/j.jmapro.2024.06.066

Operational State Recognition of Continuous Worm Gear Grinding Process Based on Wavelet Packet Energy Ratio and Double-Layer SVM Classifier DOI:10.1007/s42417-024-01470-5

Skiving & Shaping

Analysis of uncut chip geometry and cutting force in gear skiving process using a cylindrical tool DOI:10.1007/s00170-024-13647-z

A novel machining method using an internal skiving cutter with multiple inserts to manufacture ZC cylindrical worm DOI:10.21203/rs.3.rs-4265771/v1 (Open Access)

Investigation of cutting force in gear skiving by measurement and simulation DOI:10.1016/j.cirp.2024.04.036

Calculation of Coordinates of an Internal Gearing Fillet Manufactured by a Pinion-type Shaper Cutter with Rounded Tip DOI:10.2991/978-94-6463-423-5_19 (Open Access)

Геометричне Моделювання Процесу Power Skiving Для Нар?зання Зовн?шнього Зубчастого В?нця DOI:10.31471/1993-9965-2023-2(55)-31-39 (Open Access)

A Mathematical Modeling of CNC Skiving Process for Manufacturing Helical Face Gears Using Sensitivity Matrix Combined with Levenberg-Marquardt Algorithm DOI:10.1115/1.4065725

A Mathematical Modeling of Computer Numerical Control Skiving Process for Manufacturing Helical Face Gears Using Sensitivity Matrix Combined With Levenberg–Marquardt Algorithm DOI:10.1115/1.4065725

Investigation of non-stationary cut-in processes in Pover Skiving method https://elartu.tntu.edu.ua/handle/lib/45618 (Open Access)

Materials & Heat Treatment

Estudo da nitreta??o a plasma de engrenagens sinterizadas em Astaloy A https://hdl.handle.net/10183/274469 (Open Access)

Effect of Precipitated Particles on Austenite Grain Growth of Al- and Nb-Microalloyed 20MnCr Gear Steel DOI:10.3390/met14040469 (Open Access)

Effect of Post-Plasma Nitrocarburized Treatment on Mechanical Properties of Carburized and Quenched 18Cr2Ni4WA Steel DOI:10.3390/lubricants12050153 (Open Access)

Fixture Hardening of Aerospace Gears: Quenching and Distortion Analysis https://www.aimnet.it/public/PDF/mc-tpm/MCHTSE5_TPMS4_2024_Proceedings/LINK/TEXT/T5_002.pdf (Open Access)

Macro-segregations and their role in distortions in case-hardened ring gears https://www.aimnet.it/public/PDF/mc-tpm/MCHTSE5_TPMS4_2024_Proceedings/LINK/TEXT/T5_028.pdf (Open Access)

Comparison of the effects of induction heating composite shot peening and conventional shot peening on residual stress, microhardness, and microstructure of 20CrMnTi gear steel DOI:10.1016/j.surfcoat.2024.130887

Real-time prediction method of carbon concentration in carburized steel based on a BP neural network DOI:10.1080/25787616.2024.2350184 (Open Access)

The Design of Hardened Case and Carburizing Process of Subway Gear Based on Spalling Fatigue DOI:10.1007/s11668-024-01942-6

Study on Influences of Ni Content, Nitriding Hardening Depth, and Shot Peening on Bending Fatigue Performance of 42CrMo Gears DOI:10.3969/j.issn.1004-132X.2024.03.002 (Open Access)

Effect of Scanning Electron Beam Pretreatment on Gas Carburization of 22CrMoH Gear Steel DOI:10.3390/coatings14050611 (Open Access)

Effect of Plasma Nitriding Technology Parameters on Working Surface Quality Gears made of SAE 5120 Steel DOI:10.1007/s42417-024-01446-5

The effect of fine particle peening on aviation gear performance, part II: Rolling contact fatigue DOI:10.1111/ffe.14349

Prediction of residual stress depth profiles in case-carburized gears DOI:10.1007/s10010-024-00739-1 (Open Access)

Effect of microstructure on wear resistance during high temperature carburization heat treatment of heavy-duty gear steel DOI:10.1016/j.mtcomm.2024.109486

Dynamic design and transmission performance analysis based on CF/PEEK composite for short flexspline harmonic drive DOI:10.1007/s12206-024-0509-y

Effect of induction heating composite shot peening on surface integrity parameters of 20CrMnTi gear steel DOI:10.1007/s00170-024-13814-2

Determination of the fracture toughness of carburized Pyrowear 53 steel for planetary gears by the small punch test method DOI:10.1007/s43452-024-00992-9 (Open Access)

Optimized Compound Layer Design for Highly Loaded Nitrided Gears DOI:10.1007/s11665-024-09659-1 (Open Access)

Manufacture and Performance of Case-Carburized Gears (Influence of Heat Treatment Processes on the Changes in Surface Shape) DOI:10.1299/jsmemecjo.2005.4.0_181 (Open Access)

Effect of carburizing time treatment on microstructure and mechanical properties of low alloy gear steels DOI:10.1088/2053-1591/ad5cd6 (Open Access)

Gear Metrology

High Precision Measuring Method for Micro Gears Basing on White Light Interferometer DOI:10.12338/j.issn.2096-9015.2023.0352 (Open Access)

An overview on line laser 3D measurement of gears DOI:10.1016/j.precisioneng.2024.04.018

Small Modulus Injection Gear Size Inspection Method Based on Super Resolution DOI:10.1109/JSEN.2024.3390033

A method for determining the actual coordinate system of spiral bevel gears by the measured positions of eight tooth surfaces DOI:10.1088/1361-6501/ad49ba

Eigenvalue Analysys Of Graph Laplacian Representing Helix Deviation Network https://easychair.org/publications/preprint/V17r (Open Access)

An approach for reverse engineering and redesign of additive manufactured spare parts DOI:10.1017/pds.2024.73 (Open Access)

Object image and modulation-based method to segment gear tooth flank region from interference fringe patterns DOI:10.1117/1.OE.63.5.054105

Analysis of the Impact of Geometry Modifications on the Fit of Splined Shaft Connections Manufactured Using Selected AM Methods DOI:10.31803/tg-20240422144655 (Open Access)

Development of Defect Detection Models for Standard and Modified Gear Tooth Surfaces based on FFT/DWT DOI:10.21203/rs.3.rs-4355606/v1 (Open Access)

Desarrollo de trayectorias para mecanizado y verificación de engranajes https://zaguan.unizar.es/record/135010 (Open Access)

Full geometric information measuring model of 3D gear based on laser scanning techniques DOI:10.1117/12.3019560

Reverse engineering of geometric design parameters using shape information of non-standard spur gear DOI:10.1002/mawe.202400017

Robust phase unwrapping algorithm for gear interferometry based on mutual information and adaptive spin-inpainting approaches DOI:10.1016/j.optcom.2024.130748

Optimization application of Canny algorithm in gear image edge detection DOI:10.1117/12.3030576

A virtual measurement method for evaluating the gear radial composite deviation based on point cloud data DOI:10.1016/j.rineng.2024.102380 (Open Access)

Experimental uncertainty evaluation by measuring a micro gear standard using focus variation https://doi.org/10.1088/1361-6501/ad5ea1 (Open Access)

Rapid and high-precision measurement method for fine pitch gears without high-precision installation DOI:10.1016/j.measurement.2024.115157

Additive manufacturing

Development of 3D printed mecanum mobile manipulator and task-space control DOI:10.1007/s12206-024-0302-y

Comparative analysis of 3D printing technologies (FDM and SLA) for the production of complex geometry parts https://infoteh.etf.ues.rs.ba/zbornik/2024/radovi/P-3-3.pdf (Open Access)

Two-step forging of polyimide powders into small-/medium-sized gears with and without carbon fiber reinforcement DOI:10.21741/9781644903131-290 (Open Access)

Optimization of the extrusion rate for different layer thicknesses to achieve controlled mechanical properties in MEX 3D printing of low-alloy steel DOI:10.1016/j.jmapro.2024.05.008 (Open Access)

3D Printed Harmonic Drive for Legged Mobile Robots DOI:10.1007/978-3-031-59257-7_59

Research on and Application of Feature Recognition and Intelligent Retrieval Method for Multi-Component Alloy Powder Injection Molding Gear Based on Partition Templates DOI:10.3390/met14050579 (Open Access)

Technological optimization and fatigue evaluation of carbon reinforced polyamide 3D printed gears DOI:10.1016/j.heliyon.2024.e34037 (Open Access)

Comparison Of Gear Manufacturing Time Using Particle Separation And Fdm Processes https://urn.nsk.hr/urn:nbn:hr:262:743953

Optimizing surface finish in FDM-printed polycarbonate spur gears through abrasive flow finishing: insights from physics and material science perspectives DOI:10.1088/1402-4896/ad5a52

Other

Experimental characterization of wear and failure modes depending on different loading conditions applied on cylindrical polyamide 66 gears DOI:10.21203/rs.3.rs-4234823/v1 (Open Access)

A combined process of electrochemical machining and slotting for semi-blind hole involute internal splines enhanced by a new cathode design DOI:10.21203/rs.3.rs-4244272/v1 (Open Access)

Optimization of Wire EDM Process Parameters in the Fabrication of Spur Gear Using Taguchi Technique DOI:10.46254/BA06.20230128 (Open Access)

Experimental investigation on wire electric discharge machining of Nimonic alloy miniature gear using PARETO ANOVA DOI:10.1016/j.matpr.2024.05.023

Experimental investigations and optimization of process parameters using COPRAS method during laser beam machining of Hardox-400 spur gears DOI:10.1007/s12008-024-01851-w

Experimental investigation of electrochemical machining for involute internal spline using cathode working teeth sheet with circumferential vibration DOI:10.1016/j.precisioneng.2024.05.004

A new method of rolling finishing forming process of spiral bevel gears investigated by numerical simulation and experiment DOI:10.1007/s00170-024-13935-8

Experimental investigation on abrasive flow finishing of FDM printed polymeric spur gear DOI:10.56042/ijems.v31i2.623 (Open Access)

#gears