SCADA | ICP DAS Products
Perzhin Kara
Automation Controller | Industrial Communication | Remote I/O Module | DAQ Card
In this article, we will briefly review products related to a DCS/SCADA system manufactured by ICP DAS. This article certainly does not cover all ICPDAS products that can be used in the DCS/SCADA systems.
We all know that in Refineries / Petroleum / Petrochemical / Gas Stations / Electricity / Power / Factory and etc. plants there are a lot of signals and processes that need to be controlled and monitored. These plans can be divided into three categories: small, medium, large plans. The variety of ICP DAS products enables experts to develop and personalize their own specialized plans.
Definition: "SCADA is an acronym for supervisory control and data acquisition, a computer system for gathering and analyzing real-time data. SCADA systems are used to monitor and control a plant or equipment in industries such as telecommunications, water and waste control, energy, oil and gas refining, and transportation."
A SCADA system usually consists of the main elements in the below picture:
PAC(Programmable Automation Controller):
The PAC family of ICP DAS is a modular network-based PAC with the capability of connecting I/O either through its own dual backplane bus or alternatively through remote I/O units and remote I/O modules. PAC family includes WinPAC, XPAC, LinPAC, iPAC, ViewPAC, Motion PAC and μPAC for different requirements in OS, CPU and development platform.
The XPAC is WES7/WES2009/WinCE6.0 based PACs that combine computing, I/O, and operator interface into a single unit and provide the perfect solution for integrating HMI, data acquisition and control in an individual PAC.
WinPACs are innovative products by ICP DAS. Some properties of WinPACs are as below:
Powerful CPU Module | Rich I/O Expansion Ability (RS-232/485, Ethernet, FRnet, CAN) | Dual Watchdog Timer | Redundant Power Inputs | Highly Reliable Under Harsh Environment | Rich Software Solutions
Hidden in narrow spaces, however, showing great capacity and existing in a wide range of applications, we are right talking about the I-7188 and μPAC-7186. These are the μPACs (micro Programmable Automation Controllers) designed and launched by ICP DAS. With fast-booting operating system MiniOS7, flexible COM port configuration and user-defined I/O pins, μPAC just meets every kind of requirement in general applications, such as data acquisition, automation systems, and remote control. Both I-7188 and μPAC-7186 series are palm-sized PACs. μPAC-7186 series are the more advanced PACs with faster CPU, 10/100 Base-TX Ethernet and lower power consumption.
- WISE PAC (Web-based PAC)
- Mini-PAC (M2M Mini-PAC )
- iPPC (Industrial Panel PC)
- ViewPAC (PAC with Display)
- IWS PAC (Windows CE 7.0 and InduSoft Based)
- Smart View
- iBPC (Industrial fanless embedded Box PC)
RTU(Remote Terminal Unit):
RTUs are divided into two categories: Slots that can be installed directly on PACs and Modules that can be connected to the SCADA system using RS-485/ Ethernet/ FRnet/ CAN Bus connections.
In the case of ICP DAS RTUs, it should be noted that it covers a wide range of industrial communication such as CANBus CANopen DeviceNet CCON J1939 PROFIBUS HART EtherNet/IP BACnet/IP PROFINET EtherCAT M-Bus .
Here are three types of powerful ICPDAS RTUs that are widely used in large and mid-size SCADA systems: (I/O Expansion Unit)
ET-87P4-MTCP/ET-87P8-MTCP | ET-8KP4-MTCP/ET-8KP8-MTCP
ET-87Pn-MTCP series is a Modbus TCP I/O expansion unit to expand I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. It offers two Ethernet switch ports for daisy-chain topology. The daisy-chain feature allows ET-87Pn to connect in series to each other or other Ethernet devices. Users can easily simplify the cabling and save installation space with the feature. Therefore, it is very easy to integrate remote I/O to customer’s applications.
I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.. Most SCADA software support Modbus communication protocol, thus users can easily and quickly integrate remote I/Os to the SCADA software as data acquisition and monitor to apply to environment monitoring, power management, factory automation, etc.
iP-8000-MTCP series is a Modbus TCP I/O expansion unit to expand I-8K and I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
iP-8000-MRTU series is a Modbus serial I/O expansion unit to expand I-8K and I-87K series I/O modules over the serial port for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
RU-87P1/RU-87P2/RU-87P4/RU-87P8
RU-87Pn series is a remote intelligent I/O expansion unit that used to expand I-87K series I/O modules over the RS-485 for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, and counter/frequency I/O modules.
I-87Kn is a unit to expand I/O via the RS-485. It is designed to be used in a harsh and noisy environment, so the hardware is manufactured with a wide power input range (10 ~ 30 VDC), isolated power input and can operate under wide temperature (-25 ~ +75°C). To simplify the installation and maintenance of I/O modules.
There are more than 30 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
USB-87P1/USB-87P2/USB-87P4/USB-87P8
USB-87Pn is a unit to expand I/O via the USB. It is designed to be used in a harsh and noisy environment, so the hardware is manufactured with a wide power input range (10 ~ 30 VDC), isolated power input and can operate under wide temperature (-25 ~ +75°C). To simplify installation and maintenance of I/O modules, it provides many useful features, such as hot-swap allowed, auto-configuration, LED indicators for fault detection, dual watchdog to keep alive, programmable power-on and safe values for safety.
The iDCS-8000 is a distributed modular I/O system which communicates with numerous controllers via different communicating interfaces. The iDCS-8000 provides an easy installation of the I/O modules and process cabling. It is highly modularized and flexible so that I/O modules can be combined to suit many applications including the most known types of signals, digital-analog, pulse, and HART. The iDCS-8000 can be mounted in many configurations to fit most requirements both in single or fully redundant applications.
The iDCS-8000 is a redundant system designed for harsh environments such as oil refining plants, chemical plants, pharmaceutical manufacturing, and water treatment. Moreover, the iDCS-8000 offers the advantage of easy maintenance, the modules, power, communication, and I/O, and termination boards can be easily hot-swapped. Besides, there are many functions built-in in iDCS-8000 like auto-configuration, fault detection, dual watchdog, etc.
HMI (Human-Machine Interface)
ICP DAS has several HMI models that you can find them through the following links to learn more about these products:
Touch Monitor | TouchPAD | ViewPAC
Software
Finally, the software that ICP DAS uses for SCADA system and PAC programming:
---------------------------------------------------------------------------------------------------------------
Perzhin Kara Co. | Distributor of ICP DAS in the Middle East
For complete information, please contact us | Email: [email protected]
ICP DAS Middle East | www.icpdas.me
Airports I ITS I BRT I Smart City & Buildings I Digital Transformation I SCADA I ELV systems.
5 年Would u please let me know the SIL fatigue for PAC RTU n other field devices Does analog module can PID functionality Does PAC n RTU comply Exd certification