Rotap Sieve Shaker Rotation Direction

1. The correct direction of motor rotation is required.

2. Refueling: Inject ordinary oil into the chassis and add it to the height of the red line of the oil mark. The oil level should be checked regularly, and the oil should be replaced every six months. The upper and lower slides should be opened regularly to add butter, the main shaft sleeve should be filled with the butter cup regularly, and tightened one turn to make the butter enter the lubricating surface. The dirt in the copper sleeve of the upper and lower slide plates should be cleaned regularly, and new grease should be added after cleaning.

3. Power supply wiring: The direction of the single-phase motor has been adjusted before leaving the factory, and it can be used when it is connected to the power supply. After the three-phase motor is connected to the power supply, the hammer iron top rod should be lifted to a reasonable height before starting the machine, and the test rotation should be performed to observe whether the steering is correct. Note that the device must be turned in the correct direction for use.

4. Install the sleeve screen: Loosen the nut on the sleeve screen base, install the sleeve screen and move the sleeve screen base to a suitable position, tighten the sleeve screen base nut, and fix the sleeve screen base, then it can be used .

?5. Timing: This machine has a timing function. The timing adjustment method is: adjust the degree on the transistor relay, check it with a stopwatch, and increase or decrease the scale to the precise time;

Single group rotap sieve shaker offers a compact design and aggressive sieving action that accurately reproduces the circular and tapping motion of the test sieve in manual sieving, the sieve shaker delivers 278 vibrations and 156 taps per minute, making and requite ideal for Users reproducible sieving analysis.

?Double rotation sieve shaker can be equipped with two sieve towers at the same time, it replicates the circular and percussive motion of manual sieving with uniform mechanical motion, can accommodate two stacks of 200mm or 300mm diameter test ma sieves, and can sample two sieves simultaneously.

https://www.dahanmachine.com/product-center/ROTAP-SIEVE-SHAKER.html