Rod Mill:Introduction and Category of Rod Mill

Rod mills have two types dry type rod mill and wet type rod mill.Machinery uses the advanced technology of controlled feeding and discharging, equip with suitable grinding body according to the actual grinding material, and change the traditional surface contact into line contact so that the discharging size is more even and the yield is higher.

Application and Usage of Rod Mill:

Grinding rod mill is widely used in industries which have a high requirement on the uniformity of the finished materials, such as refractory, chemical industry, metallurgy, glass and other industries. Rod mill is also used in sand making industries in recent years.

Features of Rod Mill:

1. Grinding media can contact with the ore in a line way in the grinding process. Therefore, rod mill can grind materials selectively;

2. The particle size is relatively uniform and there are few over crushed particles.

3. The processing capacity of rod mill is bigger than ball mill for the coarse crushing on the same specifications, and vice versa.

Working Principle of Rod Mill:

Rod mill makes tube run with the help of the reduction gears drove by dynamo or the low speed synchronization electrical machine. There are steel balls in the tube. Steel balls are threw at a certain high by centrifugal and friction force and then fall down. The grinded material enters into the tube continuously and is crushed by the moving steel balls. After that, they are discharged from the machine naturally. Then they will start the following working process.

Rod Mill

Production:0.62–180 t/h

Feeding size:≤25–≤50 mm

Discharge size:0.833–0.147 mm

Power:18.5–630 kw

Applied material:quartz, iron ore, copper ore, gold ore, glass, construction waste, cement clinker, etc

welcome to my website! www.hiimac.com

or contact: [email protected] for more information.