RIMEX DGS/IGLR Wheels

RIMEX DGS Wheels

The revolutionary Double Gutter Service (DGS) Series is a RIMEX TSR wheel/rim assembly with two bead bands, two side rings, one two-piece lock ring and one standard lock ring. The DGS was developed as a position sensitive outer dual so the inside tyre could be easily mounted/demounted without removing the outer wheel/rim base. It is engineered with safety and time savings in mind.

RIMX IGLR Wheels

IGLR wheels are designed for the front steer and inner dual positions.When IGLR wheels are installed on all four loader wheel positions, tyre changes become quick and easy; allowing stubborn tyre beads to be dealt with when time permits.

IGLR components can be pre-mounted, using the RIMEX Pre-mounting Stand, which significantly reduces tyre servicing downtime.

RIMEX DGS / IGLR Wheels Combination

See below the potential time savings achieved with the installation of the DGS/IGLR combination over industry standard five piece rims.

300 Hours Saved

The eight piece DGS / IGLR Series combination saved 300 hours or 12.5 days of equipment availability per year (based on a fleet of 20, 240t, haul trucks with an average of 153 inside tyre changes and 39 outside tyre changes per year.)

Inside tyre removal and replacement*

Outside tyre removal and replacement*

Times may vary based on skill and conditions.*

Make existing products more efficient with DGS and Standard?Wheels

Install RIMEX DGS wheels to haul truck outer dual positions without upgrading the inner dual wheels.?Simply install a two-piece lock ring on the standard inner dual wheels. Now the inner dual tyres can be changed without removing the outer dual wheels.?The standard wheels that were removed from the outer dual positions, can be used as spare stock to support the front and inner dual positions. DGS wheels can be utilised on a wide variety of haul trucks.?

Removing stubborn loader wheels with IGLR wheels

By using RIMEX IGLR wheels on all four positions of a loader, tyre changes become quick and easy. Wheel components can be premounted, ready for installation, dramatically reducing loader downtime. Stubborn tyre beads are dealt with when time permits.?

Maximise safety, efficiency and ROI with DGS and IGLR wheels

Utilising RIMEX DGS and IGLR wheels on all six positions of a haul truck will not only save you time and money, but will greatly reduce the risk of injury to tyre technicians: ? The use of an impact wrench is eliminated. ? Two-piece lock ring sections are lighter, easier to handle, install and secure in place than a one-piece lock rings. NOTE: Two-piece lock rings are required on ALL rear positions.

RIMEX DGS ad IGLR wheels are manufactured to suit a wide range of tyre sizes and equipment models. Learn more about RIMEX wheels at rimex.com.au and youtube.com/@rimexaustralia