Reducing the cost of continuous fiber 3D printing materials
DLR has developed a novel approach to produce thermoplastic impregnated fibers for lower cost versus current slit-tape materials. Read more.
要查看或添加评论，请登录
Ginger Gardiner的更多文章
-
Solution-based digital composites fabrication2021年7月29日
Solution-based digital composites fabrication
MIT evolves liquid biomaterials into a new approach for sustainable engineered composite structures. Read more.
35
3 条评论 -
Easy-to-use kits enable infield repair of composite structures2021年7月22日
Easy-to-use kits enable infield repair of composite structures
Portable kit enables patch repairs using UV-cure glass fiber/vinyl ester or room-temp stored carbon fiber/epoxy…
30
1 条评论 -
Integrating antennas into composite aerostructures2021年7月19日
Integrating antennas into composite aerostructures
ACASIAS project integrates Ku-band array antenna in novel AFP tape orthogrid with drastically reduced tooling for more…
49
-
Adapting composites 3D printing to evolving needs2021年7月16日
Adapting composites 3D printing to evolving needs
Continuous fiber printing pioneer increases print cell options, size, hybridization and simulation capability for…
45
2 条评论 -
Speeding RTM with heat-flux sensors2021年7月15日
Speeding RTM with heat-flux sensors
Clean Sky 2 INNOTOOL 4.0 project advances cure monitoring for larger and less costly lightweight landing gear made…
47
4 条评论 -
Reprocessable, repairable and recyclable epoxy resins for composites2021年5月26日
Reprocessable, repairable and recyclable epoxy resins for composites
CIDETEC has patented thermo-mechanically reprocessable epoxy resins and composites based on the exchange of aromatic…
37
1 条评论 -
STELIA Aerospace Composites advances hydrogen storage2021年5月17日
STELIA Aerospace Composites advances hydrogen storage
Airbus subsidiary converts aero experience into industry-leading storage efficiency for fuel cell vehicles. Read the…
66
3 条评论 -
Z-direction composite properties on an affordable, industrial scale2021年5月3日
Z-direction composite properties on an affordable, industrial scale
Boston Materials uses milled reclaimed carbon fibers to increase modulus, impact/delamination resistance and produce…
41
-
Combining AC and DC dielectric measurements for cure monitoring of composites2021年4月22日
Combining AC and DC dielectric measurements for cure monitoring of composites
Lambient Technologies advances dielectric analysis (DEA) for more reliable, affordable composites manufacturing. "Both…
16
-
Composites protect subsea cables for offshore wind power2021年4月1日
Composites protect subsea cables for offshore wind power
Balmoral (Aberdeen, Scotland) pioneers new design and manufacturing, using a robotic winder to create a glass fiber…
31
2 条评论
社区洞察
-
3D PrintingHow do you keep up with the latest trends and developments in vat photopolymerization simulation?
-
3D PrintingHere's how you can assert your presence in a 3D printing team meeting.
-
3D PrintingHere's how you can enhance your decision-making skills as a leader in 3D Printing for informed team choices.
-
3D PrintingWhat do you do if your team is resistant to adopting and integrating new 3D Printing technologies?
-
3D ModelingHow can you improve 3D scanning accuracy by reducing motion blur?
-
3D PrintingWhat are some advanced techniques and tools for measuring and adjusting layer height in 3D printing?
-
3D PrintingHere's how you can navigate the key factors when negotiating a raise in the 3D Printing field.
-
Engineering DesignHow can you design for emerging 3D printing and robotics technologies?
其他会员也浏览了
-
Advances in precision micro/nano-electroforming: A state of the art review
Société Suisse de Chronométrie 4 年 -
Project reference on 3D Printing conformal cooling
Joyce Chan 4 年 -
Additive Manufacturing (3D Printing)
Pradeep Sankar M 1 年 -
RPS has the honor to participate in the R & D and 3D printing of Xiaopeng x2 flying car, silicone mold and carbon fiber production.
Eric Wang 3 年 -
Innovating composites for machine tools to trainer jets
Ginger Gardiner 5 年 -
A review paper on 3D printing
Ali Kashani 7 年 -
3D Opportunity in Tooling
Bernhard Vogt 9 年 -
7 news ways you’ll 3D print parts in 2017
Leslie Langnau 8 年 -
3D Printing
KASTHURI SURESH 1 年 -
Novel Topical Delivery Systems
Roger L. McMullen 8 年