READY TO USE SEASONED LIME

FAT LIME PUTTY

Also known as Wet Lime, Non-Hydraulic Lime, Slaked Lime, High-Calcium Putty

Lime

ONE MATERIAL FROM BASEMENT TO ROOF

The FAT MLIME PUTTY micro filtered is a natural product of the highest quality, specially prepared for use in the

restoration.

This special quality is obtained with the most ancient methods of production.

Careful selection of the stones determines the basis of the quality of the product, baked in coke-fired kiln, provides

us with an excellent quick lime.

The quick lime is carried out at a controlled temperature and with the first screening, only to end up in special

containment where a long maturation will lead to a correct maturation.

Further processing of re mixing and slow screening micronized leads us to obtain the final product that we provide.

So certain to satisfy your particular needs regarding the slaked lime, we guarantee the best results in complete safety.

FAT MLIME PUTTY is a soft, elastic, breathable and ready-to-use binder for application in concretes, mortars,

plasters, renders, top coats and paints, including the traditional polished lime finish called arraish. It sets only by

exposure to C02 in the air through the process of carbonation.

ADVANTAGES:

1) High Quality – Low Cost

2) Clean – free from impurities

3) More Durability

4) High Compressive Strength

5) Minimum 1/3/6 months Seasoned

6) Microfiltered 150 mesh

7) Pure Putty

8) No Wastage

9) Made in India with Italian Technology

CLASSIFICATION

Class C Lime as per IS 712-1973

COVERAGE

For reference, a 12-15mm thick plaster layer in lime and sand, 1sqft uses ~4kg of mix

containing 0.65 to 0.8 kg of FAT LIME, in a ratio of 1:3 to 1:4 by volume, with coarse sand.

www.ctseurope.com

[email protected]