Radial Springs Assist Interlocking Cavity Inserts

Radial Springs Assist Interlocking Cavity Inserts

Progressive Components Progressive Components

Progressive Components

Global Standards and Innovative Components for Maximum Tooling Performance

发布日期: 2025年2月17日
+ 关注

Center Floating Inserts for Alignment

  • Radial Springs which both lift and center floating inserts, to pre-align cores before a mold's cavity interlocks engage.
  • Rather than rigidly bolting inserts to the mold base, stripper bolts allow the Radial Spring's pressure to reduce side forces and pressure on alignment locks.
  • Previous design practices utilized disc springs to provide preload in the Z axis, but Progressive's new Radial Springs go a step further by positioning the core insert in the X and Y axis for minimal force to be experienced with the initial lock engagement.
  • Radial Springs are available in four sizes to fit Progressive's Stripper Bolt diameters of 1/4", 5/16", 3/8", and 1/2".
  • For alignment, Progressive carries Cavity Interlocks in both a round and a flat series.

Install on core half as shown above. For best performance, use four Stripper Bolts and Radial Springs per insert with four Cavity Locks.

For more information on Progressive's new Radial Springs, Stripper Bolts, Flat Cavity Interlocks, Round Cavity Interlocks, or our extensive line of standard and exclusive mold alignment components, visit www.procomps.com, email [email protected], or call 1-800-269-6653. For a complete product listing, catalog pages, and CAD geometry downloads, please visit shop.procomps.com.



Progressive Product Spotlight Progressive Product Spotlight

Progressive Product Spotlight

2,063 位关注者

订阅

要查看或添加评论，请登录

Progressive Components的更多文章

社区洞察

其他会员也浏览了